Heavy-Duty Barrier Wall End for PIG® BUILD-A-BERM® Barrier #PLR109
Sold as: 2 per box
End your BUILD-A-BERM® Barrier against a wall without using gobs of caulk to create a proper seal. Our Heavy-Duty Wall End fits perfectly against both the floor and a vertical surface to provide a convenient, seepage-free connection.
Product Description
- Sealed, 90-degree Wall End sits flush against both the floor and a wall, curb, etc.; helps you create professional-looking containment areas without altering your Barrier, using excessive caulk or risking seepage
- Constructed of 35-ounce vinyl-coated fabric with an open cell polyethylene foam rubber core
- Pre-drilled aluminum mounting strips with steel anchors secure Wall End to concrete, asphalt and most surfaces; remove anchors to reposition as needed, then seal with caulking (not included)
- Create any configuration by combining with other BUILD-A-BERM® components; ends overlap and can be sealed together for liquid-proof containment
- High-visibility orange color indicates traffic resistance and coordinates with other heavy-duty sections
Additional Product Information
Warnings & Restrictions
There are no known warnings and restrictions for this product.
Specifications
Style:
Drive Over
Color:
Orange
Dimensions:
3" L x 5.5" W x 2" H
Intended For:
Smooth Surface
Temperature Limit:
-22 °F to 160 °F
Sold as:
2 per box
Weight:
2 lbs.
Composition:
Cover - 35-oz. PVC
Core - Open-Cell Polyethylene Foam
Strips – Aluminum
Anchors - Galvanized Steel
Technical Documents
Regulations and Compliance
40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
Average customer rating for Heavy-Duty Barrier Wall End for PIG® BUILD-A-BERM® Barrier #PLR109
based on reviews.
Welcome to Reviews
Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?
- How did it perform?
- Was it delivered quickly?
- Would you purchase it again?
You must sign in to write a review.
Individual Reviews
Accessories
You'll also need...
Industrial-Strength Vinyl Cement
Sili-Thane™ 803 Sealant
