Heavy-Duty Vented Corner for PIG® BUILD-A-BERM® Barrier #PLR108

Sold as: 2 per box

These traffic-resistant Corners let you surround machinery or storage areas for permanent containment that doesn't limit vehicle access. When used with BUILD-A-BERM® Heavy-Duty Barriers, built-in vents relieve pressure caused by vehicle traffic.

    Product added successfully.

    Return To Product

    Go To Cart

     
    Quantity   

    Product Description

    • Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your Barrier
    • Constructed of 35-ounce vinyl-coated fabric with an open cell polyethylene foam rubber core; durable enough to withstand repeated drive-over traffic from heavy vehicles with sufficient ground clearance
    • Pre-drilled aluminum mounting strips with steel anchors secure Corner to concrete, asphalt and most surfaces; remove anchors to reposition as needed, then seal with caulking (not included)
    • Create any configuration to suit your application or environment by combining with other BUILD-A-BERM® components; ends overlap and can be sealed together for liquid-proof containment
    • High-visibility orange color indicates traffic resistance and coordinates with other heavy-duty sections

    Additional Product Information

    Warnings & Restrictions

    There are no known warnings and restrictions for this product.

    Specifications

    Style:

    Drive Over

    Color:

    Orange

    Dimensions:

    7.25" L x 5.5" W x 2" H

    Intended For:

    Smooth Surface

    Temperature Limit:

    -22 °F to 160 °F

    Sold as:

    2 per box

    Weight:

    2 lbs.

    Composition:

    Cover - 35-oz. PVC
    Core - Open-Cell Polyethylene Foam
    Strips – Aluminum
    Anchors - Galvanized Steel

    Technical Documents

    Regulations and Compliance

    40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

    40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

    Average customer rating for Heavy-Duty Vented Corner for PIG® BUILD-A-BERM® Barrier #PLR108

    based on  reviews.

    Welcome to Reviews

    Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?

    • How did it perform?
    • Was it delivered quickly?
    • Would you purchase it again?

    You must sign in to write a review.

    Need Help?

    Individual Reviews

    Live Chat 1-800-HOT-HOGS®  (468-4647)