PIG® BUILD-A-BERM® Barrier #PLR222
Sold as: 1 each
Permanently contain leaks and spills around machinery or storage areas without building cement curbs or installing angle iron. The PIG® BUILD-A-BERM® Barrier confines liquids but also keeps its shape — even when you run over it!
Product Description
- Made of pliable closed-cell foam, so the Barrier springs back into shape after you walk on it or roll over it with light, wheeled equipment (driving over it with heavy equipment or forklifts is not recommended)
- Nonabsorbent vinyl covering resists oils, coolants and most chemicals
- Includes straight sections and corners; create any length, shape or configuration to suit your application or environment
- Component ends overlap and can be sealed together for improved liquid containment
- Simple installation; cut to length with scissors or utility knife, fit pieces together and secure to floor with included silicone caulking, then seal seams with Industrial-Strength Vinyl Cement (sold separately) and included vinyl strapping
- Easy removal requires only a flat-bladed shovel
- High-visibility yellow color draws attention to Barrier for increased safety
Additional Product Information
Warnings & Restrictions
-
Shipping Restrictions
This product can ONLY be shipped to: United States, Kuwait, Qatar.
Specifications
Style:
Walk On
Color:
Yellow
Dimensions:
25" L x 5" W x 2" H
Intended For:
Smooth Surface
Temperature Limit:
-22 °F to 160 °F
Sold as:
1 each
Weight:
21 lbs.
New Pig Patent:
5,820,297
# per Pallet:
8
Composition:
Barrier Covering, Seam Mender – Vinyl
Foam Insert – Flexible Polyurethane
Sealant - Sili-Thane™ 803 Sealant
Includes:
2 - 25' L x 5.5" W x 2" H PIG® BUILD-A-BERM® Rolls
6 - 10.3 fl. oz Sili-Thane™ 803 Sealant Tubes
1 - 4" W x 10' L 22 oz. Vinyl Seam Mender
4 - 7.25"L x 5.5"W x 2"H PIG® BUILD-A-BERM® Corners
Technical Documents
- Product Data Sheet (PDS)
- Material Safety Data Sheet (MSDS) for Sili-Thane™ 803 Sealant
- Chemical Compatibility for PIG® Build-A-Berm® Barrier
Regulations and Compliance
40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
Average customer rating for PIG® BUILD-A-BERM® Barrier #PLR222
based on reviews.
Welcome to Reviews
Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?
- How did it perform?
- Was it delivered quickly?
- Would you purchase it again?
You must sign in to write a review.
