PIG® BUILD-A-BERM® Heavy-Duty Barrier #PLR283

Sold as: 1 each

Heavy-Duty Barrier controls liquids indoors or out and withstands drive-over traffic from trucks and heavy vehicles.

    Product added successfully.

    Return To Product

    Go To Cart

     
    Quantity   

    Product Description

    The PIG® BUILD-A-BERM® Heavy-Duty Barrier provides permanent or semi-permanent containment in high-traffic areas on concrete, asphalt, or most sealed surfaces. Durable construction is designed to withstand indoor or outdoor traffic from trucks, loaded tow motors, and other heavy vehicles with sufficient ground clearance. Ideal for protecting storm drains from contamination in areas where liquids are handled and stored.
    • Constructed of 35-ounce vinyl-coated fabric with an open cell polyethylene foam rubber core; durable enough to withstand repeated drive-over traffic from heavy vehicles with sufficient ground clearance
    • 2"-high Berm compresses to approximately 1/4" when driven over; springs back to shape when vehicles pass
    • Pre-drilled aluminum mounting strips with steel anchors secure Berm to concrete, asphalt and most surfaces; remove anchors to reposition Berm as needed, then seal with caulking (not included)
    • When used in conjunction with other 2"-high BUILD-A-BERM® Barriers, orange color indicates heavy-duty section where drivers can enter and exit; can also be used as a stand-alone Barrier
    • Ends can be connected to create a Barrier of greater length; seal seams with Industrial-Strength Vinyl Cement (sold separately)

    Additional Product Information

    Warnings & Restrictions

    There are no known warnings and restrictions for this product.

    Specifications

    Style:

    Drive Over

    Color:

    Orange

    Dimensions:

    12' L x 5.5" W x 2" H

    Intended For:

    Smooth Surface

    Temperature Limit:

    -22 °F to 160 °F

    Sold as:

    1 each

    Weight:

    10.3 lbs.

    New Pig Patent:

    5,820,297

    # per Pallet:

    32

    Composition:

    35 oz. Vinyl-Coated Fabric with Open-Cell Polyethylene Foam Insert
    Aluminum Fastening Strips
    Galvanized Steel Anchors

    Includes:

    6 - 4' L x 1/8" H x 1" W Mounting Strips

    33 - 1/4" x 1 5/8" Anchors

    Technical Documents

    Regulations and Compliance

    40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

    40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

    Average customer rating for PIG® BUILD-A-BERM® Heavy-Duty Barrier #PLR283

    based on  reviews.

    Welcome to Reviews

    Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?

    • How did it perform?
    • Was it delivered quickly?
    • Would you purchase it again?

    You must sign in to write a review.

    Need Help?

    Individual Reviews

    Accessories

    You might like...

    Heavy-Duty Vented Corner for BUILD-A-BERM® Barrier

    Heavy-Duty Vented Corner for BUILD-A-BERM® Barrier

    Heavy-Duty Barrier Wall End for BUILD-A-BERM® Barrier

    Heavy-Duty Barrier Wall End for BUILD-A-BERM® Barrier

    Live Chat 1-800-HOT-HOGS®  (468-4647)