PIG® Steel Spill Containment Pallet #PAK241
Sold as: 1 each
Store drums of flammable liquids on this rugged Steel Pallet to comply with regulations and protect workers. Not only does it have a 66-gallon sump to catch leaks and spills, but it can also be grounded to prevent dangerous sparks.
Product Description
- Durable steel can be bonded and grounded to control static electricity and prevent sparking while transferring or storing flammable liquids
- Fully welded sump meets UFC requirements; catches leaks and spills to help you comply with regs and keep floors slip free
- 4-way forklift entry allows easy movement from any direction (unloaded only)
- Drain plug lets you empty sump without removing drums; lift-out grating for hassle-free sump cleaning
- Powder coating guards against rust and corrosion; black color hides grime
Additional Product Information
Warnings & Restrictions
There are no known warnings and restrictions for this product.
Specifications
Color:
Black
Dimensions:
55.25" L x 55.25" W x 8.75" H
Load Capacity UDL:
5000 lbs.
Sump Capacity:
66 gal.
Capacity:
Four 55-gal. Steel or Poly Drums
Drain:
Yes
Fork Truck Access:
Four-way, Move Unloaded Only
Grates:
One 55.25" L x 55.25" W
Sold as:
1 each
Weight:
210 lbs.
Composition:
Powder-Coated 12-Gauge Steel
Technical Documents
Certifications, Approvals and Ratings
UFC Article 79 Section 7901.10
Regulations and Compliance
40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Average customer rating for PIG® Steel Spill Containment Pallet #PAK241
based on reviews.
Welcome to Reviews
Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?
- How did it perform?
- Was it delivered quickly?
- Would you purchase it again?
You must sign in to write a review.
