Vented Corner for 2" PIG® BUILD-A-BERM® Barrier #PLR103

Sold as: 2 per box

These Corners let you completely surround machinery or storage areas for permanent containment that doesn't limit vehicle access. When used with heavy-duty BUILD-A-BERM® Barriers, built-in vents relieve pressure caused by heavy vehicle traffic.

    Product added successfully.

    Return To Product

    Go To Cart

     
    Quantity   

    Product Description

    • Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without damaging your Barrier
    • Create any shape or configuration to suit your application or environment by combining with other components; ends overlap and can be sealed together for liquid-proof containment
    • Made of pliable closed-cell foam, so the Corner springs back into shape after you walk on it or roll over it with light, wheeled equipment (Driving over the corner itself with heavy equipment or forklifts is not recommended)
    • Nonabsorbent vinyl covering resists oils, coolants and most chemicals
    • Simple installation; fit pieces together, secure to floor with silicone caulking and seal seams with PVC cement (caulking and cement not included)
    • Easy removal requires only a flat-bladed shovel
    • High-visibility yellow color draws attention to Barrier for increased safety

    Additional Product Information

    Warnings & Restrictions

    There are no known warnings and restrictions for this product.

    Specifications

    Style:

    Walk On

    Color:

    Yellow

    Dimensions:

    7.25" L x 5.5" W x 2" H

    Intended For:

    Smooth Surface

    Temperature Limit:

    -22 °F to 160 °F

    Sold as:

    2 per box

    Weight:

    1.315 lbs.

    Composition:

    18 oz. Vinyl-Coated Fabric with Polyethylene Foam Core

    Technical Documents

    Regulations and Compliance

    40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

    40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

    Average customer rating for Vented Corner for 2" PIG® BUILD-A-BERM® Barrier #PLR103

    based on  reviews.

    Welcome to Reviews

    Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?

    • How did it perform?
    • Was it delivered quickly?
    • Would you purchase it again?

    You must sign in to write a review.

    Need Help?

    Individual Reviews

    Live Chat 1-800-HOT-HOGS®  (468-4647)