Wall End for 2" PIG® BUILD-A-BERM® Barrier #PLR117

Sold as: 2 per box

End your BUILD-A-BERM® Barrier against a wall without using gobs of caulk to create a proper seal. Our specially designed Wall End fits perfectly against both the floor and a vertical surface to provide a convenient, seepage-free connection.

    Product added successfully.

    Return To Product

    Go To Cart

     
    Quantity   

    Product Description

    • Sealed, 90-degree Wall End sits flush against both the floor and a wall, curb, etc.; helps you create professional-looking containment areas without altering your Barrier, using excessive caulk or risking seepage
    • Nonabsorbent vinyl covering resists oils, coolants and most chemicals
    • Create any shape or configuration by combining with other BUILD-A-BERM® components (sold separately); ends overlap and can be sealed together for liquid-proof containment
    • Simple installation; fit pieces together, secure to floor with silicone caulking and seal seams with PVC cement (caulking and cement not included)
    • Easy removal requires only a flat-bladed shovel
    • Made of pliable closed-cell foam, so Wall End springs back into shape after you walk on it or roll over it with light, wheeled equipment (driving over it with heavy equipment or forklifts is not recommended)
    • High-visibility yellow color draws attention to Barrier for increased safety

    Additional Product Information

    Warnings & Restrictions

    There are no known warnings and restrictions for this product.

    Specifications

    Style:

    Walk On

    Color:

    Yellow

    Dimensions:

    3" L x 5.5" W x 2" H

    Intended For:

    Smooth Surface

    Temperature Limit:

    -22 °F to 160 °F

    Sold as:

    2 per box

    Weight:

    1.00 lbs.

    Composition:

    Cover - 18-oz. PVC
    Core - Open-Cell Polyethylene Foam

    Technical Documents

    Regulations and Compliance

    40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

    40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

    Average customer rating for Wall End for 2" PIG® BUILD-A-BERM® Barrier #PLR117

    based on  reviews.

    Welcome to Reviews

    Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?

    • How did it perform?
    • Was it delivered quickly?
    • Would you purchase it again?

    You must sign in to write a review.

    Need Help?

    Individual Reviews

    Live Chat 1-800-HOT-HOGS®  (468-4647)