|
|
 Email
 Print
|
|
|
Vapor Trap™ Drum Lid
#DRM1030
|
|
|
|
 |
|
|
|
|
|
|
|
|
Convert a 55-gallon steel drum into a safe, convenient collection container for hazardous waste. A gasketed Lid with easy-access port reduces vapor and odor emissions during and after waste disposal to help you comply with both fire codes and EPA regs!
Show Details...
- Lid offers controlled, temporary containment of oil-soaked rags, used oil or solvent containers, lab waste and much more
- Foam rubber gaskets reduce vapor, odor and VOC emissions to ensure worker safety and keep you in compliance with EPA regulations
- FM-approved for the storage of flammables; also meets NFPA specifications and OSHA regulations
- 4.75" diameter, easy-access port flips open to accept waste while discouraging recovery of disposed items and limiting exposure to odor and vapors; self-closing lid springs shut after use to reseal container
- Vent relieves pressure buildup between 3 and 5 psig for increased safety
- Durable steel Lid is finished in chemically resistant powder coat for long service life
- Wing-style latch releases to open Lid for emptying or disposal of large items; can be padlocked (not included) to prevent unauthorized access
- Easily install on, or remove from, any open-head 55-gallon steel drum with a screwdriver and wrench; included tape helps keep band in place while tightening to ensure a reliable seal
|
|
Use With:
|
55-gal. Open-Head Steel Drums
|
|
Dimensions:
|
ext. dia. 22.75" x 6" H
|
|
Sold as:
|
1 each
|
|
Weight:
|
14.433 lbs.
|
|
Composition:
|
Steel
|
|
|
|
Technical Documents |
|
Product Data Sheet (PDS)
|
|
|
Regulations and Compliance |
|
40 CFR 262.34(c)
-
Hazardous waste generators may accumulate 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers marked "hazardous waste," at or near the point of generation, under the control of the operator generating the waste. Waste in excess of this amount must be removed from the area within three days.
|
|
40 CFR 264.1086(c)(1)(ii)
-
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
|
|
|
|
There are no known warnings and restrictions for this product. |
|
|
Back to Top
|
|
|
|
