|
|
 Email
 Print
|
|
|
Stackable Steel Transport Pallet with Side Walls
#PAK196
|
|
|
|
 |
|
|
|
|
|
|
|
|
The chances of a spill occurring increase while you're transporting or stacking your inventory. The side walls on this Pallet make sure your containers stay where they belong to help you avoid these dangerous and costly accidents.
Show Details...
- Three-sided barrier prevents drums, cans and other containers from falling and spilling during storage or transport
- Solid walls contain splashes during liquid transfers and provide clear division between separated materials
- Pallets can be stacked two high to save floor space
- Integrated sump contains leaks and spills; helps you comply with containment regulations and allows vertical segregation of incompatible materials
- Durable steel construction with hard-shell finish stands up to heavy use
- Pallet can be grounded using standard lug on exterior of unit for storage of oil, diesel, coolant and other combustibles
- Galvanized steel grating easily lifts out, allowing access to sump for emptying and cleaning; resists rust and corrosion
- Welds are 100% inspected to ensure leak-free use
- Top flares make alignment easier when stacking for secure seating and steady long-term storage
- Ample height accommodates palletized drums without inhibiting access to upper Pallet
- Four-way forktruck access makes moving convenient from any side
- Optional, custom shelving is available upon request; call 1-800-HOT-HOGS® (468-4647)
|
|
Color:
|
Blue
|
|
Dimensions:
|
55" W x 55" H x 34" D
|
|
Load Capacity UDL:
|
1200 lbs.
|
|
Sump Capacity:
|
66 gal.
|
|
Sold as:
|
1 each
|
|
Weight:
|
365 lbs.
|
|
Composition:
|
Steel
|
|
|
|
Technical Documents |
|
Product Data Sheet (PDS)
|
|
|
Regulations and Compliance |
|
40 CFR 112.7
-
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
|
|
40 CFR 122.26
-
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
|
|
40 CFR 264.175
-
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
|
|
|
|
There are no known warnings and restrictions for this product. |
|
|
Back to Top
|
|
|
|
