|
|
 Email
 Print
|
|
|
PIG® BUILD-A-BERM® Heavy-Duty Barrier
#PLR283
|
|
|
|
 |
|
|
|
|
|
|
|
|
Heavy-Duty Barrier controls liquids indoors or out and withstands drive-over traffic from trucks and heavy vehicles.
Show Details...
The PIG® BUILD-A-BERM® Heavy-Duty Barrier provides permanent or semi-permanent containment in high-traffic areas on concrete, asphalt, or most sealed surfaces. Durable construction is designed to withstand indoor or outdoor traffic from trucks, loaded tow motors, and other heavy vehicles with sufficient ground clearance. Ideal for protecting storm drains from contamination in areas where liquids are handled and stored. - Constructed of 35-ounce vinyl-coated fabric with an open cell polyethylene foam rubber core; durable enough to withstand repeated drive-over traffic from heavy vehicles with sufficient ground clearance
- 2"-high Berm compresses to approximately 1/4" when driven over; springs back to shape when vehicles pass
- Pre-drilled aluminum mounting strips with steel anchors secure Berm to concrete, asphalt and most surfaces; remove anchors to reposition Berm as needed, then seal with caulking (not included)
- When used in conjunction with other 2"-high BUILD-A-BERM® Barriers, orange color indicates heavy-duty section where drivers can enter and exit; can also be used as a stand-alone Barrier
- Ends can be connected to create a Barrier of greater length; seal seams with Industrial-Strength Vinyl Cement (sold separately)
|
|
Style:
|
Heavy-duty
|
|
Color:
|
Orange
|
|
Dimensions:
|
12' L x 5" W x 2" H
|
|
Sold as:
|
1 per box
|
|
Weight:
|
10.3 lbs.
|
|
New Pig Patent:
|
5,820,297
|
|
# per Pallet:
|
48
|
|
Composition:
|
35 oz. Vinyl-Coated Fabric w/ Open Cell Polyethylene Foam Insert;
Aluminum Fastening Strips;
Galvanized Steel Anchors
|
|
Includes: |
1 - 12'L x 2"H x 5"W PIG® BUILD-A-BERM® Barrier – Heavy-Duty 6 - 4' L x 1/8" H x 1" W Mounting Strips 33 - 1/4" x 1 5/8" Anchors
|
|
|
|
Technical Documents |
|
Product Data Sheet (PDS)
|
|
|
Chemical Compatibility for PIG® Build-A-Berm® Barriers
|
|
|
Regulations and Compliance |
|
40 CFR 112.7
-
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
|
|
40 CFR 122.26
-
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
|
|
|
|
There are no known warnings and restrictions for this product. |
|
|
Back to Top
|
|
|
|
