Email Print

PIG® BUILD-A-BERM® Heavy-Duty Barrier #PLR283

Sold as: 1 per box

Heavy-Duty Barrier controls liquids indoors or out and withstands drive-over traffic from trucks and heavy vehicles.

Product added successfully

Return To Product

Go To Cart

 
Quantity
Add to Cart

Product Description

The PIG® BUILD-A-BERM® Heavy-Duty Barrier provides permanent or semi-permanent containment in high-traffic areas on concrete, asphalt, or most sealed surfaces. Durable construction is designed to withstand indoor or outdoor traffic from trucks, loaded tow motors, and other heavy vehicles with sufficient ground clearance. Ideal for protecting storm drains from contamination in areas where liquids are handled and stored.
  • Constructed of 35-ounce vinyl-coated fabric with an open cell polyethylene foam rubber core; durable enough to withstand repeated drive-over traffic from heavy vehicles with sufficient ground clearance
  • 2"-high Berm compresses to approximately 1/4" when driven over; springs back to shape when vehicles pass
  • Pre-drilled aluminum mounting strips with steel anchors secure Berm to concrete, asphalt and most surfaces; remove anchors to reposition Berm as needed, then seal with caulking (not included)
  • When used in conjunction with other 2"-high BUILD-A-BERM® Barriers, orange color indicates heavy-duty section where drivers can enter and exit; can also be used as a stand-alone Barrier
  • Ends can be connected to create a Barrier of greater length; seal seams with Industrial-Strength Vinyl Cement (sold separately)

Warnings & Restrictions

There are no known warnings and restrictions for this product.

Specifications

Style:
Heavy-duty
Color:
Orange
Dimensions:
12' L x 5" W x 2" H
Pre-drilled Holes:
5 per Mounting Strip
Temperature Limit(s):
-35°F (-37°C) to 175°F (79°C)
Sold as:
1 per box
Weight:
10.3 lbs.
New Pig Patent:
5,820,297
# per Pallet:
48
Composition:
35 oz. Vinyl-Coated Fabric w/ Open Cell Polyethylene Foam Insert;
Aluminum Fastening Strips;
Galvanized Steel Anchors
Includes:

1 - 12'L x 2"H x 5"W PIG® BUILD-A-BERM® Barrier – Heavy-Duty

6 - 4' L x 1/8" H x 1" W Mounting Strips

33 - 1/4" x 1 5/8" Anchors

Technical Documents

Product Data Sheet (PDS)

Chemical Compatibility for PIG® Build-A-Berm® Barriers

Regulations and Compliance

40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

Average customer rating for PIG® BUILD-A-BERM® Heavy-Duty Barrier #PLR283

based on  reviews.

Welcome to Reviews

Please write a review and tell other customers about your shopping experience! If you could share something about the product you purchased, what would it be?

  • How did it perform?
  • Was it delivered quickly?
  • Would you purchase it again?

You must sign in to write a review.

Write a Review

Individual Reviews

Write a Review

Accessories

You'll also need...
Sili-Thane™ Sealant Sili-Thane™ Sealant
Sili-Thane™ sealant, 6 tubes
You may need...
BUILD-A-BERM® Barrier - 2" H BUILD-A-BERM® Barrier - 2" H
straight section
corner