Barrier Vented Corner

PLR108 Write a Review

For 2" High Drive-Over Build-A-Berm Barrier, 2 each

Drive-over barrier springs back into shape when heavy vehicles pass. Custom containment berm helps you control liquids in high-traffic areas. Read More

PRICING (Based on quantity)

1+
$165.00

This product has accessories — take a look

Proposition 65
Warning for California

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical	Known to Cause
Bis-(2-ethylhexyl) Phthalate (DEHP)	Cancer/ Birth Defect/ Reproductive Harm
Lead	Cancer/ Birth Defect/ Reproductive Harm

Description

Drive-over barrier springs back into shape when heavy vehicles pass. Custom containment berm helps you control liquids in high-traffic areas.

The Drive-Over Barrier provides semi-permanent containment in high-traffic areas on concrete, asphalt or most sealed surfaces
Constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core; berm compresses to approximately 1/4" when driven over; springs back to shape when vehicles pass
Durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles with sufficient ground clearance
Secure to floor with sealant and reinforce with predrilled aluminum mounting strips and steel anchors; seal seams with vinyl cement
Create any configuration by combining with other Build-A-Berm components; ends overlap and can be sealed together for liquid-proof containment
When used with standard Build-A-Berm Barriers, orange color indicates area where drivers can enter and exit
Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your barrier

Specifications

Use With	2" High Drive-Over Build-A-Berm Barrier
Color	Orange
Dimensions	5.5" W x 11.25" L x 2" H
Temperature Limit	Works from -22°F to 160°F
Sold as	2 per box
Weight	2 lbs.
New Pig Patent	5,820,297
# per Pallet	264
Composition	Cover - 40 oz. PVC Core - Open-Cell Polyurethane Foam Strips - Aluminum Anchors - Galvanized Steel
UNSPSC	24101907
Pigalog® Page Number	Page 171

Accessories for PLR108

Reviews

Write a Review

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for PIG Build-A-Berm® Barrier
Instructions for PIG Drive-Over Build-A-Berm Barrier
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.