-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
Drum HazMat Containment Station XT
PAK245
Write a Review
Holds (2) 55 gal. Steel Drums, 58" x 33" x 75.69", 66 gal. Sump Capacity
Keep your pumps and funnels attached inside these extra-tall drum containment stations. Great for storing flammables outdoors.
Read More
PRICING (Based on quantity)
| 1+ |
|---|
|
$3,382.00
|
Description
Keep your pumps and funnels attached inside these extra-tall drum containment stations. Great for storing flammables outdoors.
- Additional vertical clearance from drum tops to ceiling allows you to store drums with pumps and funnels in place
- Swing doors open wide for hassle-free loading and unloading
- Integrated sump contains leaks and spills
- Durable steel construction with hard-shell finish stands up to heavy use and harsh weather; lockable for security
- Station can be grounded using standard lug on exterior of unit for storage of flammable liquids
- Passive ventilation helps prevent vapor accumulation
- Galvanized steel grating lifts out for easy sump access; resists rust and corrosion
- Welds are 100% inspected to ensure leak-free use
- 2-way forklift entry allows easy movement from front or back
Specifications
| Headroom | 25.75" |
| Holds | (2) 55 gal. Steel Drums |
| Dimensions | 58" W x 33" D x 75.69" H |
| Load Capacity UDL | 1200 lbs. |
| Sump Capacity | 66 gal. |
| Access | 1 Hinged Door |
| Fork Truck Access | Two-Way Fork Truck Access |
| Interior Dimensions | 55.25" W x 30.25" D x 61" H |
| Use With Flammables | Yes |
| Sold as | 1 each |
| Weight | 620 lbs. |
| # per Pallet | 1 |
| Composition |
Body - 16-Gauge Hot Rolled Steel Sump - 11-Gauge Hot Rolled Steel Feet - 7-Gauge Hot Rolled Steel Grating - Galvanized Steel |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 381 |
Accessories for PAK245
- Reel Grounding End
- Hand Clamp Bonding End
$334.00 - $462.00
- Hand Clamp Grounding End
- Hand Clamp Bonding End
- 10'
$104.00 - $107.00
Reviews
Additional Information
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
- Certifications, Approvals and Ratings
NFPA 704
