Skip to content Skip to navigation menu

Drum HazMat Containment Station XT

Holds (4) 55 gal. Steel Drums, 58" x 58" x 72.44", 66 gal. Sump Capacity
Keep your pumps and funnels attached inside these extra-tall drum containment stations. Great for storing flammables outdoors.   Read More 

PRICING (Based on quantity)

This product has accessories — take a look 


Keep your pumps and funnels attached inside these extra-tall drum containment stations. Great for storing flammables outdoors.
  • Additional vertical clearance from drum tops to ceiling allows you to store drums with pumps and funnels in place
  • Swing doors open wide for hassle-free loading and unloading
  • Integrated sump contains leaks and spills
  • Durable steel construction with hard-shell finish stands up to heavy use and harsh weather; lockable for security
  • Station can be grounded using standard lug on exterior of unit for storage of flammable liquids
  • Passive ventilation helps prevent vapor accumulation
  • Galvanized steel grating lifts out for easy sump access; resists rust and corrosion
  • Welds are 100% inspected to ensure leak-free use
  • 2-way forklift entry allows easy movement from front or back


Headroom 25.75"
Holds (4) 55 gal. Steel Drums
Dimensions 58" W x 58" D x 72.44" H
Load Capacity UDL 2400 lbs.
Sump Capacity 66 gal.
Access 1 Hinged Door
Fork Truck Access Two-Way Fork Truck Access
Interior Dimensions 55.25" W x 55.25" D x 61" H
Use With Flammables Yes
Sold as 1 each
Weight 880 lbs.
# per Pallet 1
Composition Body - 16-Gauge Hot Rolled Steel
Sump - 11-Gauge Hot Rolled Steel
Feet - 7-Gauge Hot Rolled Steel
Grating - Galvanized Steel
UNSPSC 24101905
Pigalog® Page Number Page 381

Accessories for PAK246


Additional Information

  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
  • Certifications, Approvals and Ratings
  • NFPA 704

Contact Us