-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
Drum HazMat Containment Station
PAK198
Write a Review
Containment Shed, Use With Steel Drums Only, 66 gal. Sump Capacity
House your drums of flammable liquids in these groundable, steel containment stations. All welds are 100% inspected for leak-free containment!
Read More
PRICING (Based on quantity)
| 1+ |
|---|
|
$2,615.00
|
Description
House your drums of flammable liquids in these groundable, steel containment stations. All welds are 100% inspected for leak-free containment!
- Hinged lid is supported by heavy-duty gas cylinders and opens easily for access to drum tops
- Swing doors open wide for hassle-free loading and unloading
- Integrated sump contains leaks and spills
- Durable steel construction with hard-shell finish stands up to heavy use and harsh weather; lockable for security
- Station can be grounded using standard lug on exterior of unit for storage of flammable liquids
- Passive ventilation helps prevent vapor accumulation
- Galvanized steel grating lifts out for easy sump access; resists rust and corrosion
- Welds are 100% inspected to ensure leak-free use
- Four-way forklift access makes moving convenient from any side
Specifications
| Type of Container | Steel Drums Only |
| Color | Blue |
| Dimensions | 55.75" W x 34.75" D x 62" H |
| Load Capacity UDL | 1200 lbs. |
| Sump Capacity | 66 gal. |
| Access | 2 Hinged Doors, 1 Hinged Lid |
| Containment Type | Containment Shed |
| Fork Truck Access | Four-Way Fork Truck Access |
| Interior Dimensions | 53" W x 45" H x 33" D |
| Number of Containers | 2 Drums |
| Use With Flammables | Yes |
| Sold as | 1 each |
| Weight | 500 lbs. |
| Composition | Steel |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 381 |
Accessories for PAK198
- Reel Grounding End
- Hand Clamp Bonding End
$307.00 - $435.00
- Hand Clamp Grounding End
- Hand Clamp Bonding End
- 10'
$98.00 - $101.00
Reviews
Additional Information
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
