-
New Pig Technical Team
Our Tech Team is a group of experts that is dedicated to answering all your regulation questions! We can be reached at 1-800-HOT-HOGS (468-4647) or by email at xtechnical@newpig.com.
NEW PIG • PO BOX 304, TIPTON, PA 16684-0304
1-855-493-HOGS (493-4647) • Fax: 1-800-621-PIGS (621-7447) • hothogs@newpig.com
© 2024 New Pig Corporation. All rights reserved.
Trademarks • Privacy Policy • Terms of Use
3 Comments
Realsays:
09/26/2018 at 11:19 amI thought 36″ wide clearance was required for all points in exit routes?
Karensays:
10/03/2018 at 2:24 pmHi Real,
Thank you for asking about this. OSHA actually permits exit access routes to be as narrow as 28 inches in some cases [29 CFR 1910.36(g)(2)]. As part of OSHA’s Means of Egress Regulation, the NFPA 101 Standard is incorporated into regulation by reference. This Standard also requires a minimum of 28 inches at all points [NFPA 101, 7.3.4.1.2] unless a greater width is required by another part of the standard.
The 36-inch requirement has been adopted by many jurisdictions because most standard doors are at least 36 inches wide, to facilitate access for anyone with impaired mobility. Exit routes should never narrow at any point, so if the door is 36 inches wide, it makes sense that the rest of the exit rout is at least this wide. This is especially important (and is required) when there is only one exit route from a building.
Please reach out if you have any further questions.
Darrinsays:
09/26/2018 at 11:42 amGreat Checklist!
Fun Fact: Helena, Montana allows ORANGE exit signs!
Leave a Reply