Skip to content Skip to navigation menu

Oil-Tainer® Storage Tank

PAK2100 Write a Review
150 gal., 34" x 49", 1 each
Weather-resistant, lockable, double-wall tanks provide 110% secondary containment to help you meet regulations.   Read More 

PRICING (Based on quantity)



Weather-resistant, lockable, double-wall tanks provide 110% secondary containment to help you meet regulations.
  • Double-wall tank provides 110% secondary containment to help you meet waste oil regs
  • Indoors or out, polyethylene construction resists UV rays, rust and corrosion
  • Filter captures debris in drain before it can enter tank
  • Level monitoring gauge lets you determine tank's content level with a glance
  • Lockable opening adds security and prevents cross-contamination
  • Arrives assembled and ready to use
  • Translucent safety yellow tank allows for easy visual inspection
  • Features quick-release 2" coupling for safer, easier drain evacuation
  • Ideal for smaller garages and fleet centers


Style Double Wall
Color Black/Yellow
Dimensions ext. dia. 34" x 49" H
Storage Capacity 150 gal.
Brand Chem-Tainer
Meets UL 142 Standard Does Not Meet UL 142 Standard
Sold as 1 each
Weight 104 lbs.
Composition Polyethylene
Opening Dimensions (1) 12" Fill Hole, (1) 2", & (1) .5" Openings
UNSPSC 20142901
Pigalog® Page Number Page 316


Additional Information

  • Chemical Compatibility for Chemtainer® Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.193(c)(3)
    Secondary containment systems must be "provided with a leak-detection system that is designed and operated so that it will detect the failure of either the primary or secondary containment structure or the presence of any release of hazardous waste or accumulated liquid in the secondary containment system…"
  • 40 CFR 279.22(a)
    Generators of used oil, "should not store used oil in units other than tanks, containers," or other units regulated under 40 CFR 264 or 265.


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Oil Storage Regulations

Be sure to check federal, state and local oil storage regulations prior to purchasing.

Contact Us