-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ 1-Drum Soft Side Spill Berm
PAK903
Write a Review
Ideal For Portable Drum Containment, 2.5' x 2.5' x 4", 9.5 gal. Sump Capacity
As Low As $120.00
Portable Soft Side Berm contains leaks and spills from stored containers, and you don't need a ramp to load drums!
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $129.00 | $120.00 |
Description
Portable Soft Side Berm contains leaks and spills from stored containers, and you don't need a ramp to load drums!
- 4"-high foam sidewalls eliminate the need for expensive and bulky ramps; drive over walls with a drum truck and they spring back into place
- Heavy-duty, 22 oz. vinyl provides resistance to tears, punctures and chemicals
- Lightweight, portable unit folds up for easy transport and sets up in seconds
- Low-cost alternative to hard plastic pallets and decks
- Removable polyethylene grate keeps drums out of liquid and protects fabric
- Perfect for temporary storage of drums, machine parts, tanks and generators or as washdown pad
- Helps you meet hazardous waste containment regulations (depending on the size of containers stored)
Specifications
| Traffic | Cart Traffic |
| Holds | (1) 55 gal. Plastic or Steel Drum |
| Dimensions | 2.5' W x 2.5' L x 4" H |
| Sump Capacity | 9.5 gal. |
| Double-Stackable Unit | No |
| Drain | None |
| Fork Truck Access | No Fork Truck Access |
| Grates | (1) 24" L x 23" W Grate |
| Ideal For | Portable Drum Containment |
| Wall Type | Always Up |
| Sold as | 1 each |
| Weight | 11 lbs. |
| # per Pallet | 24 |
| Composition |
Berm - 20 oz. Vinyl Grate - Polyethylene |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 398 |
Reviews
Additional Information
- Chemical Compatibility for PIG® Soft-Sided Berms
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
