-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ 2-Drum Steel Spill Containment Deck
PAK220
Write a Review
Holds (2) 55 gal. Steel Drums, 26" x 51" x 12", 66 gal. Sump Capacity
Get the sump capacity you need, the durability you expect, and meet UFC requirements for storing chlorinated solvents and other flammables.
Read More
PRICING (Based on quantity)
| 1+ |
|---|
|
$503.00
|
Description
Get the sump capacity you need, the durability you expect, and meet UFC requirements for storing chlorinated solvents and other flammables.
- Economical alternative to steel spill containment pallets; avoid the extra costs of pallet feet while still benefiting from full containment capacity
- Full-height internal support channels add strength; flow-through vents allow liquid to spread across sump
- Durable, powder-coated steel resists dents and provides years of service
- Steel grating lifts out for convenient access to sump
- Can be grounded to avoid static sparking; ideal for storing oils, lubricants, solvents, flammables and more
- Safely stores up to four drums; 66-gallon sump catches leaks and spills to help keep floors safe
- We test all of our Containment Pallet designs at max load for months to ensure they can handle full capacity at your facility
Specifications
| Holds | (2) 55 gal. Steel Drums |
| Color | Black/Gray |
| Dimensions | 26" W x 51" L x 12" H |
| Load Capacity UDL | 3000 lbs. |
| Sump Capacity | 66 gal. |
| Double-Stackable Unit | No |
| Drain | None |
| Fork Truck Access | No Fork Truck Access |
| Grates | (1) 51" L x 26" W Grate |
| Use With Flammables | Yes |
| Sold as | 1 each |
| Weight | 158 lbs. |
| # per Pallet | 5 |
| Composition | 12 Gauge Steel |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 371 |
Accessories for PAK220
- Reel Grounding End
- Hand Clamp Bonding End
$307.00 - $435.00
- Hand Clamp Grounding End
- Hand Clamp Bonding End
- 10'
$98.00 - $101.00
Reviews
Additional Information
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
- Certifications, Approvals and Ratings
UFC Article 79 Section 7901.10
