PIG® Build-A-Berm® Barrier 90° Corner

For 6" High Build-A-Berm Barrier 2 per box

Build a semi-permanent barrier around your machinery or storage areas with our crush-resistant spill berms.
Read More >

Risk-Free Guarantee

PRICING (Based on quantity)

PRICING (Based on quantity)



Purchase by the pallet — Save on freight!  |  # per Pallet: 42

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical Known to Cause
Bis-(2-ethylhexyl) Phthalate (DEHP) Cancer/ Birth Defect/ Reproductive Harm
Lead Cancer/ Birth Defect/ Reproductive Harm

Build a semi-permanent barrier around your machinery or storage areas with our crush-resistant spill berms.

  • Barriers can be constructed into a semi-permanent, high-visibility barrier that's exactly the size and shape you need - indoors or out
  • Pliable open-cell foam barrier springs back into shape after you walk or roll over it with light, wheeled equipment
  • Durable, 18-oz. all-vinyl covering resists oils, coolants and most chemicals
  • Cut to length with utility knife; for best installation results, secure to a smooth, sealed surface with sealant (sold separately) and join seams with vinyl cement (sold separately)
  • Contain leaks and spills around your machinery without building expensive concrete curbs or cutting and installing angle iron
  • High-visibility yellow color draws attention to barrier for increased safety
  • Easy removal requires only a flat-bladed shovel
  • Great for use around battery charging stations, machinery or any other leak-prone areas
  • Join two 6"-high Build-A-Berm straight sections at a 90-degree angle (sold separately)
Nobody beats the quality, engineering and performance of PIG. You won't find these products anywhere else!

Style 90° Corner
Use With 6" High Build-A-Berm Barrier
Dimensions 9" W x 10.5" L x 6" H
Barrier Height 6" H
Brand PIG
Temperature Limit Works from -22°F to 160°F
Color Yellow
Traffic Foot Traffic
Sold as 2 per box
Weight 3 lbs.
New Pig Patent 5,820,297
# per Pallet 42
Composition Cover: 18 oz. Vinyl-Coated Fabric
Core: Open-Cell Polyurethane Foam
UNSPSC 24101907
Pigalog® Page Number Page 153

  • Product Data Sheet (PDS)
  • Chemical Compatibility for PIG Build-A-Berm® Barrier
  • Instructions for Using PIG® Build-A-Berm® Barrier
  • SPCC: 8 Things You Need to Know
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
  • Certifications, Approvals and Ratings
  • UFC Article 64 Section 6404.4


1 2 3 4 5
  • star star star star star By Josh 07/06/2023

    Great Product

    "We had to purchase a lot of these berm kits to berm up our liquid racks. The entire system is very easy to use and install. It is also easy to customize to the size you need. We ended up putting berms around 5 of our racks and were able to do it in a day. Since install we have had multiple occurrences where lifts have gotten to close and ran them over and they spring right back up. We have also had lifts hit them with their forks and pop them up off the concrete and they do just as it claims the glue pops right off for easy removal if you ever need it, since ours were accidental we were able to easily glue them back in place. We have also had a few spills and the berm did their job perfectly and held the liquid in place to keep it away from drains or causing a potential slip with one of the employees. Overall this is a great system if you are needing to contain liquids or need to "Build-a-berm" in a short amount of time. Pro tip: a battery powered caulk gun with makes things much easier and quicker. "

  • star star star star star By Forest 11/10/2014

    Corner bariers

    "The corner barriers make it very easy to berm a perimeter around a personnel doorway. The entrances to the sleeve for a tight fit were excellent. There is just enough play to roll the sleeve back when approximating the length of the straight return portion. An easy install."

Sign Up for PIG Deals

Score incredible offers, insightful info, cool promos, handy tips and more!

Thank You!

You're signed up! Keep an eye out for exclusive promos sent to your inbox.