-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ Build-A-Berm® Barrier Straight Section
PIG™ Build-A-Berm® Barrier Straight Section
PLR264
(5)
Write a Review
Ideal For Semi-Permanent Use, 5.5" x 15' x 2"
As Low As $208.00
Build a permanent barrier around your machinery or storage areas with our crush-resistant spill berms.
Read More
PRICING (Based on quantity)
| 1 | 2 -3 | 4 + |
|---|---|---|
| $229.00 | $218.00 | $208.00 |
Description
Build a permanent barrier around your machinery or storage areas with our crush-resistant spill berms.
- Barriers can be constructed into a semi-permanent, high-visibility barrier that's exactly the size and shape you need - indoors or out
- Pliable open-cell foam barrier springs back into shape after you walk or roll over it with light, wheeled equipment
- Durable, 18-oz. all-vinyl covering resists oils, coolants and most chemicals
- Cut to length with utility knife; for best sealing results, secure to a smooth, sealed surface with Sili-Thane sealant (PTY340); join seams with Industrial-Strength Vinyl Cement (PTY105)
- Contain leaks and spills around your machinery without building expensive concrete curbs or cutting and installing angle iron
- High-visibility yellow color draws attention to barrier for increased safety
- Easy removal requires only a flat-bladed shovel
- Great for use around battery charging stations, machinery or any other leak-prone areas
Specifications
| Traffic | Foot Traffic |
| Color | Yellow |
| Dimensions | 5.5" W x 15' L x 2" H |
| Barrier Type | Vinyl Build-A-Berm |
| Ideal For | Semi-Permanent Use |
| Install/Deploy Type | Glued In Place Barrier |
| Temperature Limit | Works from -22°F to 160°F |
| Sold as | 1 each |
| Weight | 6 lbs. |
| New Pig Patent | 5,820,297 |
| # per Pallet | 20 |
| Composition |
Cover - 18 oz. Vinyl-Coated Fabric Core - Open-Cell Polyurethane Foam |
| UNSPSC | 24101907 |
| Pigalog® Page Number | Page 181 |
Accessories for PLR264
PTY340
Sili-Thane™ 803 Sealant
- For Metals, Masonry, Glass, Plastics & Wood
- 6 - 10.3 fl. oz. Cartridges
$64.00 - $64.00
Reviews
Spill containment
Easy and fast to install. Good product.
build a berm
I have an area that is 20'x6' in a pump room that constantly leaks oil. the New Pig berm works fantastic. It is easy to use. The oil is contained inside the berm cleanup is easy.
Performance
Build a Beam works great. Easy to install. Fast delivery. Would buy again.
Built-To-Last
Installed this berm in 2010 on the exterior of a truck dock to contain any bacon grease spill inside and it is still mounted in place. Maybe these could be used to mark off the 3 feet of clearance required in front of all circuit breaker panels. Typically, I have seen tape or paint marking the zone.
Berm check out
Howdy. I had just purchased a couple section of the Build a berm. I fit well and has performed the way I wanted it to. I liked the first two, so I bought 3 more for other applications. I had bought some ends for teh dors that I was putting them in. The end pieces in my opinion are over priced and they did not work my application. I was able to caulk the ends and the build a berms worked well for me.
Additional Information
- Chemical Compatibility for PIG Build-A-Berm® Barrier
- Instructions for Using PIG® Build-A-Berm® Barrier
- White paper – Should I be Worried about SPCC? 8 Things you need to know.
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
