-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ Build-A-Berm® Barrier Straight Section
PIG™ Build-A-Berm® Barrier Straight Section
PLR278
(2)
Write a Review
Ideal For Long-Term Custom Containment, 4.5" x 15' x 1.5"
Build a semi-permanent barrier around your machinery or storage areas with our crush-resistant spill berms.
Read More
PRICING (Based on quantity)
| 1 | 2 -3 | 4 + |
|---|---|---|
| $246.00 | $235.00 | $224.00 |
Description
Build a semi-permanent barrier around your machinery or storage areas with our crush-resistant spill berms.
- Barriers can be constructed into a semi-permanent, high-visibility barrier that's exactly the size and shape you need - indoors or out
- Pliable open-cell foam barrier springs back into shape after you walk or roll over it with light, wheeled equipment
- Durable, 18-oz. all-vinyl covering resists oils, coolants and most chemicals
- Cut to length with utility knife; for best installation results, secure to a smooth, sealed surface with sealant (sold separately) and join seams with vinyl cement (sold separately)
- Combine with Build-A-Berm Barrier Corners (sold separately) to create liquid-proof containment; ends overlap and seams can be sealed together with Industrial-Strength Vinyl Cement (sold separately)
- Contain leaks and spills around your machinery without building expensive concrete curbs or cutting and installing angle iron
- High-visibility yellow color draws attention to barrier for increased safety
- Easy removal requires only a flat-bladed shovel
- Great for use around battery charging stations, machinery or any other leak-prone areas
- Sealant, industrial-strength vinyl cement and barrier corner pieces sold separately
Specifications
| Traffic | Cart Traffic |
| Color | Yellow |
| Dimensions | 4.5" W x 15' L x 1.5" H |
| Brand | PIG |
| Ideal For | Long-Term Custom Containment |
| Install/Deploy Type | Glued In Place Barrier |
| Temperature Limit | Works from -22°F to 160°F |
| Sold as | 1 each |
| Weight | 4.3 lbs. |
| New Pig Patent | 5,820,297 |
| # per Pallet | 36 |
| Composition |
Cover - 18 oz. Vinyl-Coated Fabric Core - Open-Cell Polyurethane Foam |
| UNSPSC | 24101907 |
| Pigalog® Page Number | Page 169 |
Accessories for PLR278
PTY340
Sili-Thane™ 803 Sealant
- For Metals, Masonry, Glass, Plastics & Wood
- 6 - 10.3 fl. oz. Cartridges
- 6 each
$67.00 - $67.00
Reviews
great product
no problems
Build-a-berm
We have used Build-a-Berm twice on my site once to build a containment for my aerial lift and once to build a barrier to keep water from entering a clean room. They were easy to install and worked out great.
Additional Information
- Chemical Compatibility for PIG Build-A-Berm® Barrier
- Instructions for Using PIG® Build-A-Berm® Barrier
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
