Skip to content Skip to navigation menu

PIG™ Build-A-Berm® Barrier Wall End

Watch Video

PIG™ Build-A-Berm® Barrier Wall End

PLR117 Write a Review

Ideal For Semi-Permanent Use, 5.5" x 3" x 2"

Build a permanent barrier around your machinery or storage areas with our crush-resistant spill berms. Read More

PRICING (Based on quantity)

1+
$87.00

This product has accessories — take a look

Description

Build a permanent barrier around your machinery or storage areas with our crush-resistant spill berms.

PIG Build-A-Berm Barriers can be constructed into a semi-permanent, high-visibility barrier that's exactly the size and shape you need - indoors or out
Pliable open-cell foam barrier springs back into shape after you walk or roll over it with light, wheeled equipment
Durable, 18-oz. all-vinyl covering resists oils, coolants and most chemicals
Cut to length with utility knife; for best sealing results, secure to a smooth, sealed surface with Sili-Thane sealant (PTY340); join seams with Industrial-Strength Vinyl Cement (PTY105)
Contain leaks and spills around your machinery without building expensive concrete curbs or cutting and installing angle iron
High-visibility yellow color draws attention to barrier for increased safety
Easy removal requires only a flat-bladed shovel
Great for use around battery charging stations, machinery or any other leak-prone areas

Seals flush against the floor and wall for a seepage-free connection

Specifications

Traffic	Foot Traffic
Color	Yellow
Dimensions	5.5" W x 3" L x 2" H
Barrier Type	Vinyl Build-A-Berm
Ideal For	Semi-Permanent Use
Install/Deploy Type	Glued In Place Barrier
Temperature Limit	Works from -22°F to 160°F
Sold as	2 per box
Weight	1 lb.
# per Pallet	260
Composition	Cover - 18 oz. PVC Core - Open-Cell Polyurethane Foam
UNSPSC	24101907
Pigalog® Page Number	Page 181

Accessories for PLR117

Reviews

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for PIG Build-A-Berm® Barrier
Instructions for Using PIG® Build-A-Berm® Barrier
White paper – Should I be Worried about SPCC? 8 Things you need to know.
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

Sign Up