Skip to content Skip to navigation menu

PIG™ Build-A-Berm® Self-Rising Drive-Over Barrier

PLR518

(1) Write a Review

Ideal For Long-Term Custom Containment, High-Traffic Areas, 7" x 9' x 4"

Drive right into and out of your 4" tall Build-A-Berm containment area; when a spill strikes, this special barrier rises to the occasion. Read More

PRICING (Based on quantity)

1+
$349.00

This product has accessories — take a look

Proposition 65
Warning for California

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical	Known to Cause
Bis-(2-ethylhexyl) Phthalate (DEHP)	Cancer/ Birth Defect/ Reproductive Harm
Lead	Cancer/ Birth Defect/ Reproductive Harm

Description

Drive right into and out of your 4" tall Build-A-Berm containment area; when a spill strikes, this special barrier rises to the occasion.

Berm wall lays flat to allow forklifts, pallet jacks and drum trucks to drive-over for easy access to containment area
In the event of a spill, drive-over gate will automatically rise with the spill level to keep liquids contained
Berm ends can be directly connected to an existing 4"H Build-A-Berm system (sold separately)
Ends of 4"H berm are pliable, open-cell foam core covered with vinyl; gate section is constructed of durable PVC
Secure to floor with sealant and reinforce with predrilled aluminum mounting strips (included) and steel anchors (included); seal seams with vinyl cement (not included)

Specifications

Traffic	Vehicle Traffic
Color	Orange/Yellow
Dimensions	7" W x 9' L x 4" H
Brand	PIG
Ideal For	Long-Term Custom Containment, High-Traffic Areas
Install/Deploy Type	Glued In Place Barrier
Temperature Limit	Works from -22°F to 160°F
Sold as	1 each
Weight	9.4 lbs.
New Pig Patent	9,498,806
# per Pallet	40
Composition	Self-Rising Barrier - PVC Cover - 18 oz. Vinyl-Coated Fabric Core - Open-Cell Polyurethane Foam Strips - Aluminum Anchors - Galvanized Steel
Includes	1 - 9' Self-Rising Barrier 8 - 1" x 24" Aluminum Strips 4 - 1" x 3.5" Aluminum Strips 33 - 1/4" x 1 5/8" Anchors
UNSPSC	24101907
Pigalog® Page Number	Page 166

Accessories for PLR518

Reviews

Based on 1 reviews

Write a Review

By todd

1/9/2018

Spill Barrier

We have used this Build-a-Berm barrier before the only draw we have had is it will last us about a year due to fork lift traffic and if the barrier is sticking up some the bottom of the mast will catch on it and it eventually tears out. For what we need it to do we have determined that it is worth the cost to replace.

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for PIG Build-A-Berm® Barrier
PIG Self-Rising Drive-Over Build-A-Berm Barrier Instructions
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."