Skip to content Skip to navigation menu

PIG® Burpless® Poly-Coated Steel Drum Funnel

DRM1128

(1) Write a Review

For 20 to 55 gal. Plastic or Steel Drums w/ 2" NPT, Overfill Preventer Included, 11.25" x 15" x 15"

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance. Read More

PRICING (Based on quantity)

1 -4	5 +
1 - 4 $547.00	5 + $499.00 Best Buy
	Best Buy

Plant Engineering Product of the Year Gold Award

This product has accessories — take a look

Proposition 65
Warning for California

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical	Known to Cause
Ethylbenzene	Cancer
Toluene	Birth Defect
Hexane	Reproductive Harm

Description

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance.

Fast pouring, no splashback and a one-hand latching lid make it easy to meet regs
Exclusive latching handle design easily opens and closes lid in a simple, single-handed operation
Secure closure helps you meet closed container regs, but opens and closes instantly
Patented Burpless design vents during pouring for fast, smooth flow with no dangerous splashback
Lets you pour without venting through 3/4" bung, a possible closed container reg violation if left open
Gasket and locking mechanism create a tight seal to help reduce vapor emissions
Lockable to prevent unauthorized access
Durable, chemical-resistant powder coat helps ensure long service life
Multiple lid color options let you segregate drums
Textured, poly-coated interior adds chemical resistance, resists peeling and rusting; ideal for use with acetic acid, alcohol, water and other common liquids
Low-profile steel drum funnel is perfect for pouring from small containers
Built-in PIG Overfill Preventer stops flow when the drum is almost full to help you avoid messy overfills

Specifications

Special Feature	Burpless; Vapor Control; Padlockable
Use With	20 to 55 gal. Plastic or Steel Drums w/ 2" NPT
Dimensions	11.25" W x 15" L x 15" H
Drum Bung Opening	2" NPT Bung
Drum Size	20 gal.; 30 gal.; 55 gal.
Drainage Space	2.75" H x 10.5" Dia. Draining Area
Drum Type	Steel Drum; Poly Drum
Flame Arrestor Included	No
Lid Type	Latching/Locking Lid
Overfill Preventer Included	Yes
Sold as	1 each
Weight	14.96 lbs.
New Pig Patent	5,676,185
# per Pallet	36
Composition	Funnel - Powder-Coated Steel Lid Gasket - Polyethylene Foam Bung Gasket - PTFE Poly Coat - Epoxy
UNSPSC	27112902
Pigalog® Page Number	Page 306

Accessories for DRM1128

Reviews

Based on 1 reviews

Write a Review

By Don

1/8/2013

great solution

I needed funnels for are lab hazardous waste satellite containers. These funnels were the perfect solution, all our lab techs love there ease of use. The large handles make these big hog funnels easy to open and close! I love them because the containers stay clean and sealed and we stay compliant.

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for Polyethylene Foam Gasket for PIG Drum Lids and Funnels
Chemical Compatibility for Poly Coated Burpless® Funnel
29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape.
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled.
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."