Skip to content Skip to navigation menu

PIG® Burpless® Small Steel Drum Funnel

DRM1032

(2) Write a Review

For 5 to 55 gal. Steel or Poly Drums & Buckets w/ 2" NPT, Overfill Preventer Included, 8.25" x 11"

As Low As $291.00

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance. Read More

PRICING (Based on quantity)

1 -4	5 +
1 - 4 $315.00	5 + $291.00 Best Buy
	Best Buy

This product has accessories — take a look

Description

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance.

Fast pouring, no splashback and a one-hand latching lid make it easy to meet regs
Exclusive latching handle design easily opens and closes lid in a simple, single-handed operation
Secure closure helps you meet closed container regs, but opens and closes instantly
Patented Burpless design vents during pouring for fast, smooth flow with no dangerous splashback
Lets you pour without venting through 3/4" bung, a possible closed container reg violation if left open
Nitrile gasket and locking mechanism completely seal lid to help reduce vapor emissions
Lockable to prevent unauthorized access
Durable, chemical-resistant powder coat helps ensure long service life
Colored lid options let you segregate drums
FM Approved for flammable liquids when equipped with a PIG Drum Funnel Flame Arrestor (DRM617, sold separately)
Built-in PIG Overfill Preventer stops flow when the drum is almost full to help you avoid messy overfills

Specifications

Drum Lid Closure	Tight-Head
Special Feature	Burpless; Vapor Control; Padlockable
Use With	5 to 55 gal. Steel or Poly Drums & Buckets w/ 2" NPT
Dimensions	ext. dia. 8.25" x 11" H
Drum Bung Opening	2" NPT
Drum Size	5 gal.; 8 gal.; 10 gal.; 16 gal.; 20 gal.; 30 gal.; 55 gal.
Drainage Space	2.75"H x 5" Dia. Draining Area
Drum Type	Steel Drum; Poly Drum
Flame Arrestor Included	No
Lid	With Latching/Locking Lid
Overfill Preventer Included	Yes
Sold as	1 each
Weight	5.6 lbs.
New Pig Patent	5,676,185; 5,402,835
# per Pallet	216
Composition	Funnel - Powder-Coated Steel Lid Gasket - Nitrile Bung Gasket - PTFE
UNSPSC	27112902
Pigalog® Page Number	Page 311

Accessories for DRM1032

Reviews

Based on 2 reviews

Write a Review

By LISA

10/4/2017

Great funnel, greatly reduces VOC releases

I bought this sealable funnel to replace the plain metal funnel in our waste materials drum. Within 3 days, I could detect no residual VOC odors where the waste drum is located. Well worth the money in my opinion.

By Rob

12/7/2011

Nice product

I just installed this unit, but so far no complaints. It came quickly and is a solid piece of equipment. It appears very robust so I expect it to last much longer than our previous style which was corroded away by chemicals. This seals very well and I do not notice any chemical smell so far. I also like that it will fit on a multitude of different size drums. That allows us to adjust to the right size drum based on our waste rather than having to know up front. Thanks!

Additional Information

Product Data Sheet (PDS)

29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape.
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry.
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled.
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
40 CFR 63.744(a)(1)
Aerospace manufacturing and rework facilities must, "place used solvent laden (materials) used for cleaning in bags or other closed containers."