Skip to content Skip to navigation menu

PIG® Burpless® Small Steel Drum Funnel

DRM1050

(1) Write a Review

For 5 to 55 gal. Plastic Drums & Buckets w/ 2" Buttress Thread, Overfill Preventer Included, 8.25" x 11"

As Low As $309.00

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance. Read More

PRICING (Based on quantity)

1 -4	5 +
1 - 4 $331.00	5 + $309.00 Best Buy
	Best Buy

This product has accessories — take a look

Proposition 65
Warning for California

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical	Known to Cause
Ethylbenzene	Cancer
Toluene	Birth Defect
Hexane	Reproductive Harm

Description

Patented Burpless design delivers fast, no-splash pouring and one-handed access for easy reg compliance.

Fast pouring, no splashback and a one-hand latching lid make it easy to meet regs
Exclusive latching handle design easily opens and closes lid in a simple, single-handed operation
Secure closure helps you meet closed container regs, but opens and closes instantly
Patented Burpless design vents during pouring for fast, smooth flow with no dangerous splashback
Lets you pour without venting through 3/4" bung, a possible closed container reg violation if left open
Nitrile gasket and locking mechanism completely seal lid to help reduce vapor emissions
Lockable to prevent unauthorized access
Durable, chemical-resistant powder coat helps ensure long service life
Multiple lid color options let you segregate drums
FM Approved for flammable liquids when equipped with a PIG Drum Funnel Flame Arrestor (DRM617, sold separately)
Built-in PIG Overfill Preventer stops flow when the drum is almost full to help you avoid messy overfills

Specifications

Drum Lid Closure	Tight-Head
Special Feature	Burpless; Vapor Control; Padlockable
Use With	5 to 55 gal. Plastic Drums & Buckets w/ 2" Buttress Thread
Dimensions	ext. dia. 8.25" x 11" H
Drum Bung Opening	2" Buttress Thread
Drum Size	5 gal.; 8 gal.; 10 gal.; 16 gal.; 20 gal.; 30 gal.; 55 gal.
Drainage Space	2.75"H x 5" Dia. Draining Area
Drum Type	Poly Drum
Flame Arrestor Included	No
Lid	With Latching/Locking Lid
Overfill Preventer Included	Yes
Sold as	1 each
Weight	6 lbs.
New Pig Patent	5,676,185; 5,402,835
# per Pallet	168
Composition	Funnel - Powder-Coated Steel Lid Gasket - Nitrile Bung Gasket - PTFE
UNSPSC	27112902
Pigalog® Page Number	Page 311

Accessories for DRM1050

Reviews

Based on 1 reviews

Write a Review

By Don

8/6/2012

Getting compliant

We purchased 3 of the sealable drum funnels and our lab people who use them, have nothing but great things to say. Ordering them was very easy and they were delivered within a couple day's. We are now in the process of decideing how many more we need to help us maintain our compliance with hazardous waste satellite storage laws.

Additional Information

Product Data Sheet (PDS)

29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape.
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry.
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled.
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
40 CFR 63.744(a)(1)
Aerospace manufacturing and rework facilities must, "place used solvent laden (materials) used for cleaning in bags or other closed containers."