PIG® Collapse-A-Tainer® Drive-Through Spill Containment Berm

PAK1003 Write a Review

Ideal For Large Vehicles, Drive-Through, Automatic Rise, 14' W x 50' L x 1' H Sump, 5236 gal. Sump Capacity

As Low As $6,710.00

Containment system provides constant drive-in capability without having to manually fold sidewalls up or down. Read More

PRICING (Based on quantity)

1	2 +
1 $7,063.00	2 + $6,710.00 Best Buy
	Best Buy

Endwalls can remain folded down during normal use, but automatically rise with the liquid level when a leak occurs
Heavy-duty hinges can be manually locked into place when snow, hoses or other heavy objects could prevent the flotation system from functioning
Right-angle hinge design allows more unobstructed working space on interior of unit
Brackets remain out of the way to avoid breakage from accidental impact or driveovers
Folds to a compact size to let you store the system in a vehicle and transport it to a remote location; included strap secures unit in place
Constructed of tough XR-5 geomembrane to resist the effects of harsh chemicals and UV exposure
Grommets at each support hinge allow unit to be secured to the ground when needed
Ideal under storage tanks, tote tanks, pillow tanks, pallets loaded with drums and more
Custom sizes and colors available; call 1-800-HOT-HOGS (468-4647) for details

Traffic	Vehicle Traffic
Color	Black/Yellow
Dimensions	14.75' W x 50.75' L x 1' H
Sump Capacity	5236 gal.
Folded Dimensions	3.16' W x 3.16' L x 1.5' H Folded
Ideal For	Large Vehicles, Drive-Through, Automatic Rise
Wall Type	Manual; Self-Rising
Sold as	1 each
Weight	260 lbs.
Composition	XR-5® 30 mil
Sump Dimensions	14' W x 50' L x 1' H
UNSPSC	24111812
Pigalog® Page Number	Page 395

Chemical Compatibility for PIG Collapse-A-Tainer with XR-5®
How to Measure for PIG® Collapse-a-tainer® Containment System
Instructions for PIG Collapse-A-Tainer Spill Containment Berm
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."