Skip to content Skip to navigation menu

PIG® Collapse-A-Tainer® Spill Containment Berm

PAK791 Write a Review

Ideal For Small Vehicles, Drive-In Access, 4' W x 6' L x 1' H Sump, 179 gal. Sump Capacity

As Low As $585.00

Create affordable drive-in containment that can be staked down anywhere you need it in just a few minutes. Read More

PRICING (Based on quantity)

1	2 +
1 $612.00	2 + $585.00 Best Buy
	Best Buy

Reengineered to provide exceptional value while maintaining the quality and performance you expect from PIG Collapse-A-Tainers
No assembly required; collapsible sidewalls have attached skirt with outside aluminum-reinforced supports that help the walls stay rigid and upright
Can be held in place by positioning sand bags on skirting or by staking to the ground through grommets
Sides fold down easily to allow pallet jacks and forklifts to be driven into and out of containment
Constructed of a durable, coated geomembrane that resists chemicals, abrasion and tearing
Folds to a compact size for easy transportation and storage
Convenient one-piece design requires no additional parts or tools
Ideal for use under storage tanks, tote tanks, pillow tanks, pallets loaded with drums and more; store in trucks for emergency response to tank leaks in remote locations
Custom sizes available; call for details

Traffic	Vehicle Traffic
Color	Black/Yellow
Dimensions	6' W x 8' L x 1' H
Sump Capacity	179 gal.
Folded Dimensions	2' W x 2.42' L x 7" H Folded
Ideal For	Small Vehicles, Drive-In Access
Wall Type	Manual
Sold as	1 each
Weight	28 lbs.
# per Pallet	15
Composition	Sump - Co-Polymer Geomembrane Support Skin, Skirt - PVC Support Struts - Aluminum
Sump Dimensions	4' W x 6' L x 1' H
UNSPSC	24111812
Pigalog® Page Number	Page 394

Chemical Compatibility for PIG Collapse-A-Tainer PVC Geomembrane
How to Measure for PIG® Collapse-a-tainer® Containment System
Instructions for PIG Collapse-A-Tainer Spill Containment Berm
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."