-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG® Double Poly Drum Rack
PIG® Double Poly Drum Rack
PAK182
Write a Review
Holds (2) 55 gal. Steel Tight-Head Drums, 3000 lb. Load Capacity, With Forklift Entry; With Sump; With Dispensing
As Low As $579.00
Use this Double Poly Rack by itself to provide easy dispensing and sump capacity - add a Double Poly Stacker for even more capacity!
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $610.00 | $579.00 |
Description
Use this Double Poly Rack by itself to provide easy dispensing and sump capacity - add a Double Poly Stacker for even more capacity!
- Holds a pair of 55-gallon drums side by side
- Chemical-resistant, durable, one-piece polyethylene construction
- Accommodates collection containers up to 5 gallons
- Deep, ribbed dispensing wells collect drips, splashes and spills to keep floors dry and safe without sump contamination
- Scalloped edge on dispensing wells allows easy removal of containers
- Easily transport unloaded racks using a forklift
- Two drain plugs included
Specifications
| Holds | (2) 55 gal. Steel Tight-Head Drums |
| Material | Plastic |
| Special Feature | With Forklift Entry; With Sump; With Dispensing |
| Dimensions | 49" W x 53" L x 23" H |
| Load Capacity UDL | 3000 lbs. |
| Sump Capacity | 102 gal. |
| Sold as | 1 each |
| Weight | 122 lbs. |
| # per Pallet | 2 |
| Composition | Polyethylene |
| UNSPSC | 24101904 |
| Pigalog® Page Number | Page 351 |
Accessories for PAK182
PAK183-WH
PIG® Double Poly Drum Stacker
- Holds (2) 55 gal. Steel Tight-Head Drums
- 2400 lb. Load Capacity
- With Forklift Entry; With Dispensing
$252.00 - $272.00
Reviews
Additional Information
- Chemical Compatibility for LDPE Products
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
