-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG® Heavy-Duty Poly IBC Spill Containment Pallet with Drain
PIG® Heavy-Duty Poly IBC Spill Containment Pallet with Drain
PAK1007
Write a Review
Holds (2) IBCs, 58" x 58" x 33.5", 400 gal. Sump Capacity
As Low As $1,484.00
Our strongest Containment Unit holds up to 6 tons so you can stack two IBCs and save floor space.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 -6 | 7 + |
|---|---|---|
| $1,664.00 | $1,575.00 | $1,484.00 |
Description
Our strongest Containment Unit holds up to 6 tons so you can stack two IBCs and save floor space.
- 4"-thick, two-section decking is supported by all-poly inner pedestals for superior load handling
- Heavy-duty construction permits long-term stacked storage of two IBCs to save space
- Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals
- Textured grating holds a variety of IBC sizes; if tank has feet or pegs, be sure to use proper support pads or plates
- Translucent white sidewalls allow easy visual inspection
- Positioning pegs in pedestals keep deck from shifting
- Arrives ready to use with no assembly required
- Installed drain lets you empty the pallet without needing to pump out the liquid from the top
Specifications
| Holds | (2) IBCs |
| Color | Black/White |
| Dimensions | 58" W x 58" L x 33.5" H |
| Recycled Content | 18% Post-Industrial Recycled Polyethylene |
| Load Capacity UDL | 12000 lbs. |
| Sump Capacity | 400 gal. |
| Double-Stackable Unit | Yes |
| Drain | Includes Drain |
| Fork Truck Access | No Fork Truck Access |
| Grates | (2) 52" L x 26" W Grates |
| Use With Flammables | No |
| Sold as | 1 each |
| Weight | 415 lbs. |
| Composition | Polyethylene |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 384 |
Accessories for PAK1007
Reviews
Additional Information
- Chemical Compatibility for LDPE Products
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
