Skip to content Skip to navigation menu

PIG Heavy-Duty Poly IBC Spill Containment Unit with Drain

PAK1007 Write a Review
Holds 2 IBCs, Use With IBCs, 400 gal. Sump Capacity
As Low As $1,462.00
Our strongest Containment Unit holds up to 6 tons so you can stack two IBCs and save floor space.   Read More 

PRICING (Based on quantity)

$1,639.00 $1,551.00 $1,462.00
Recycled Content
This product has accessories — take a look 


Our strongest Containment Unit holds up to 6 tons so you can stack two IBCs and save floor space.
  • 4"-thick, two-section decking is supported by all-poly inner pedestals for superior load handling
  • Heavy-duty construction permits long-term stacked storage of two IBCs to save space
  • Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals
  • Textured grating holds a variety of IBC sizes; if tank has feet or pegs, be sure to use proper support pads or plates
  • Translucent white sidewalls allow easy visual inspection
  • Positioning pegs in pedestals keep deck from shifting
  • Arrives ready to use with no assembly required
  • Installed drain lets you empty the pallet without needing to pump out the liquid from the top


Type of Container IBCs
Color Black/White
Dimensions 58" W x 58" L x 33.5" H
Recycled Content 18% Post-Industrial Recycled Polyethylene
Load Capacity UDL 12000 lbs.
Sump Capacity 400 gal.
Containment Type Poly Containment Pallet
Double-Stackable Unit Yes
Drain Includes Drain
Fork Truck Access No Fork Truck Access
Grates (2) 52" L x 26" W Grates
Number of Containers 2 IBCs
Use With Flammables No
Sold as 1 each
Weight 415 lbs.
Composition Polyethylene
UNSPSC 24101905
Pigalog® Page Number Page 384

Accessories for PAK1007


Additional Information

  • Chemical Compatibility for LDPE Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Contact Us