Skip to content Skip to navigation menu

PIG™ Latching Drum Lid for Draining

DRM1213

(1) Write a Review

For 55 gal. Steel Drums, Draining, Bolt-Ring

Easily drain filters, parts, and containers while staying in compliance with closed container regs with this locking lid. Read More

PRICING (Based on quantity)

1 -4	5 +
1 - 4 $486.00	5 + $467.00 Best Buy
	Best Buy

This product has accessories — take a look

Proposition 65
Warning for California

The State of California mandates that the following statement is made in order to comply with the California Safe Drinking Water & Toxic Enforcement Act of 1986.

Chemical	Known to Cause
Ethylbenzene	Cancer
Toluene	Birth Defect
Hexane	Reproductive Harm

Description

Easily drain filters, parts, and containers while staying in compliance with closed container regs with this locking lid.

Latching design opens and closes with one hand for easy in-and-out drum access; no nuts, no bolts, no fuss!
Nitrile gasket and locking mechanism seal lid to help reduce vapor emissions and keep drum contents secure
Add a drum funnel screen (sold separately) for easy draining of waste liquids into open-head drums
Lid stays closed while filters or containers are draining to help you meet haz waste regulations; lid stays upright when open
Lockable to prevent unauthorized access
Durable, chemical-resistant powder coat helps ensure long service life
Multiple lid color options let you segregate drums

Tall funnel design lets you drain buckets, paint cans and containers up to 18” high.

Specifications

Special Feature	Draining
Style	Hinged Lid w/ One-Hand Latch
Use With	55 gal. Steel Drums
Dimensions	ext. dia. 23.75" x 18.75" H
Brand	PIG
Configuration	Latching & Locking Drum Lids
Drum Mounting	Bolt-Ring
Drum Size	55 gal.
Drainage Space	17.25" H x 18" Dia. Draining Area
Drum Type	Steel Drum
Sold as	1 per box
Weight	38.6 lbs.
New Pig Patent	5,931,330 ; 5,954,218
# per Pallet	12
Composition	Funnel - Powder-Coated Steel Lid Gasket - Nitrile Bung Gasket - PTFE
Padlockable	Padlockable w/ .25" Shackle
UNSPSC	27112902
Pigalog® Page Number	Page 300

Accessories for DRM1213

Reviews

Based on 1 reviews

Write a Review

By Lee

5/22/2020

Allows for gallon cans/jugs to be drained and still have the lid closed.

This is a new product for us, and so far it is working well. We put a screen in it to allow gallon containers to be overturned in it to drip dry. We did have some difficulty with damage in shipping (the extra height makes them less manageable in shipping). New Pig assures me that the packaging with be improved to better protect the product in shipping. The product itself gets a 5 star rating, but the packaging gets a 2-star rating. Hopefully the next will have better packaging.

Additional Information

Product Data Sheet (PDS)

29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape.
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry.
40 CFR 261.4
Helps you comply with 40 CFR 261.4 requiring excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed onsite.
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled.
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
40 CFR 63.744(a)(1)
Aerospace manufacturing and rework facilities must, "place used solvent laden (materials) used for cleaning in bags or other closed containers."