Watch Video

PIG® Latching Drum Lid with Fast-Latch Ring

DRM2072 Write a Review
For 20 gal. Steel Drums; 30 gal. Steel Drums, Fast Latch
The fastest installing latching drum lid you can buy for 20-gallon and 30-gallon drums stays securely closed and locked for closed container compliance.   Read More 

PRICING (Based on quantity)

$357.00 $338.00
Pig Exclusive

Description

The fastest installing latching drum lid you can buy for 20-gallon and 30-gallon drums stays securely closed and locked for closed container compliance.
  • Fast-latch ring makes installation easy on a new or reconditioned 20- or 30-gallon steel drums; no clumsy nut-and-bolt ring
  • Adjustment rod lets ring expand to fit reconditioned drums with larger diameters
  • Latching handle easily opens and closes with one hand
  • Nitrile gasket and locking mechanism seal lid to help reduce vapor emissions and keep drum contents dry and secure
  • Easy-access lid closes securely to help you meet hazardous waste regs
  • Hinge stops keep funnel lid upright when open
  • Durable, chemical-resistant powder coat helps ensure long service life
  • Lockable latch helps prevent unauthorized access
  • Hinge pin is made for easy lid removal without loosening band around drum
  • Multiple lid color options let you segregate drums for safe, compliant filling

Specifications

Style Hinged Lid w/ One-Hand Latch
Use With 20 gal. Steel Drums; 30 gal. Steel Drums
Dimensions 20.5" W x 23" L x 3" H
Brand PIG
Drum Mounting Fast Latch
Drum Size 20 gal.; 30 gal.
Drum Type Steel Drum
Sold as 1 per box
Weight 14 lbs.
Composition Lid - Steel
Gasket - Nitrile
Padlockable Padlockable w/ .25" Shackle
UNSPSC 24112112

Reviews

Additional Information

  • PIG Latching Drum Lid (Steel) Instructions
  • 29 CFR 1910.106(e)(2)(i)
    Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape.
  • 29 CFR 1910.134)(a)(1)
    A respirator shall be provided to each employee when such equipment is necessary to protect the health of such employee. The employer shall provide the respirators which are applicable and suitable for the purpose intended. The employer shall be responsible for the establishment and maintenance of a respiratory protection program, which shall include the requirements outlined in paragraph (c) of this section. The program shall cover each employee required by this section to use a respirator.
  • 29 CFR 1910.22(a)
    All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry.
  • 40 CFR 261.4
    Helps you comply with 40 CFR 261.4 requiring excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed onsite.
  • 40 CFR 262.15
    Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled.
  • 40 CFR 262.16(b)(2)(iii)
    Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
  • 40 CFR 262.17(a)(1)(iv)
    Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
  • 40 CFR 264.1086(c)(1)(ii)
    Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."