-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ Latching Drum Lid with Fusible Plugs
PIG™ Latching Drum Lid with Fusible Plugs
DRM1065
(5)
Write a Review
For 55 gal. Steel Drums, FM-Approved, Bolt-Ring
As Low As $358.00
The only latching lid that meets NFPA 30 venting requirements helps you safely contain and lock flammable materials in a 55-gallon steel drum.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $378.00 | $358.00 |
Description
The only latching lid that meets NFPA 30 venting requirements helps you safely contain and lock flammable materials in a 55-gallon steel drum.
- The only latching lid that satisfies NFPA 30 venting requirements
- In a fire, 2" and 3/4" FM Approved nylon plugs melt to vent pressure and prevent drum bursting
- Ideal for safe storage of flammable or combustible solids such as used rags and absorbents
- Latching handle easily opens and closes with one hand
- Nitrile gasket and locking mechanism seal lid to help reduce vapor emissions
- Easy-access lid closes securely to help you meet haz-waste regs
- Hinge stops keep funnel lid upright when open
- Durable, chemical-resistant powder coat helps ensure long service life
- Lockable latch helps prevent unauthorized access
- Hinge pin is made for easy lid removal without loosening band around drum
Specifications
| Special Feature | FM-Approved |
| Style | Hinged Lid w/ One-Hand Latch |
| Use With | 55 gal. Steel Drums |
| Dimensions | 23.25" W x 26.75" L x 4.375" H |
| Drum Mounting | Bolt-Ring |
| Drum Size | 55 gal. |
| Drum Type | Steel Drum |
| Sold as | 1 per box |
| Weight | 25 lbs. |
| NSN (National Stock Number) |
DRM1065-BK - 8110-01-595-7372 DRM1065-RD - 8110-01-595-7372 DRM1065-YW - 8110-01-595-7372 |
| # per Pallet | 23 |
| Composition |
Lid - Steel Gasket - Nitrile Bungs - Nylon |
| Padlockable | Padlockable w/ .25" Shackle |
| UNSPSC | 24112112 |
| Pigalog® Page Number | Page 304 |
Accessories for DRM1065
- For 55 gal. Steel Open-Head Drums
- 1 each
$165.00 - $173.00
- For 55 gal. Latching Drum Lids
- 1 each
$49.00
- Padlock
- Keyed-Different
- Shackle Dimensions .25" Dia. x 1.5" H
$16.75 - $17.50
LCK106
Keyed-Alike Aluminum Padlock
- Padlock
- Keyed-Alike
- Shackle Dimensions .25" Dia. x 1.5" H
$16.70 - $17.65
Reviews
Drum lid
Drum lid is well constructed and works great. Be sure your drums have a 23 inch (+/-1/4") diameter opening for this to seal correctly.
Review for Latching Drum Lid with Fusable Plugs
Visually appealing, product performance excellent, just a bit difficult to operate with one hand. overall good rating
Great product.
Easy to install, easy to use, and great value. Delivered on time and will order more when needed. Would like to have seen a stainless steel version to purchase. I replaced some of the caps with safety features to address pressure and vacuum conditions depending on the drum lids application.
Latching Drum Lid
It makes it very easy to comply with the closed container rules for a drum that gets opened and closed a lot in a day.
Great Product
I have purchased this product in the past and just last week. Great product... you guys have the best stuff...
Additional Information
- Chemical Compatibility for Nitrile gasket for PIG® Drum lids and funnels
- PIG Latching Drum Lid (Steel) Instructions
-
29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape. -
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry. -
40 CFR 261.4
Helps you comply with 40 CFR 261.4 requiring excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed onsite. -
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled. -
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container. -
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container. -
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
- Certifications, Approvals and Ratings
FM Approved
NFPA Code 30
