-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ Latching Lid for Poly Drum
PIG™ Latching Lid for Poly Drum
DRM1085
(2)
Write a Review
For 30 gal. Plastic Drums, Fast Latch
As Low As $390.00
Get fast, easy access to drums and meet closed container regs with the only locking latching lid designed for poly drums.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $415.00 | $390.00 |
Description
Get fast, easy access to drums and meet closed container regs with the only locking latching lid designed for poly drums.
- The first latching lid designed for 30-gallon open-head poly drums
- 3" EVA gasket and locking mechanism seal lid to help keep drum contents dry and pure
- Includes spacers to help this lid fit the five most common poly drums
- Latching handle easily opens and closes with one hand
- Crowned lid provides a cleaner appearance
- Durable, chemical-resistant powder coat helps ensure long service life
- Lockable latch helps prevent unauthorized access
- Hinge pin is made for easy lid removal without loosening band around drum
Specifications
| Style | Hinged Lid w/ One-Hand Latch |
| Use With | 30 gal. Plastic Drums |
| Dimensions | 22" W x 25.79" L x 5.7" H |
| Drum Mounting | Fast Latch |
| Drum Size | 30 gal. |
| Drum Type | Poly Drum |
| Sold as | 1 per box |
| Weight | 20.8 lbs. |
| New Pig Patent | 8,480,139 |
| # per Pallet | 23 |
| Composition |
Lid - Powder-Coated Steel Gasket - EVA |
| Includes |
1 - Lid 4 - Spacers |
| Padlockable | Padlockable w/ .25" Shackle |
| UNSPSC | 24112112 |
| Pigalog® Page Number | Page 305 |
Reviews
Durable and extremely easy to use!
We purchased one of the latching lids as a trial, because our plant workers were just too lazy to open and properly use the regular open head closures. Upon arrival, we installed the lid on a drum and noticed how sturdy it was and how easy it was to use. For our purpose, the drum is empty by default, and then liquids are added and accumulated before the drum is eventually emptied. The drum felt a little bit top-heavy with the lid on it when it was empty and up to the point there was about 4 or 5 gallons in it. Other than this, I highly recommend this lid!
Good/Dependable Product
I’ve always used New Pig products in my chemical/waste management activities at the facilities I have worked at. They’re typically well fabricated and aid with compliance requirements.
Additional Information
- Chemical Compatibility for Drum Lid EVA Gasket
- Instructions for PIG Latching Drum Lid for 30-Gallon Poly Drum
-
29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape. -
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry. -
40 CFR 261.4
Helps you comply with 40 CFR 261.4 requiring excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed onsite. -
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled. -
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container. -
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container.
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
