Skip to content Skip to navigation menu

PIG® Modular IBC Spill Containment Pallet

Holds 5 IBCs, Use With IBCs, 375 gal. Sump Capacity
Modular system saves you money by sharing sump capacity. Store your IBCs in compliance with containment regulations.   Read More 

PRICING (Based on quantity)

Pig Exclusive Recycled Content
This product has accessories — take a look 


Modular system saves you money by sharing sump capacity. Store your IBCs in compliance with containment regulations.
  • Flow-through connections let components share sump capacity to help you meet storage regulations; more economical than individual units
  • Each heavy-duty pallet section supports 9,000 lb. UDL and accommodates almost any size IBC unit
  • Pallet sections and tanks are 100% polyethylene to resist corrosion and most chemicals, including acids, solvents and oils
  • Each pallet section features 4-way forklift pockets for easy moving
  • Non-slip grates lift out for easy sump access
  • Low profile allows easy loading and access
  • Increase sump capacity by adding on an individual pallet section (PAK672) or Expansion Tank (PAK116)
  • Includes specially designed tool kit for connecting components; kit also sold separately as PAK117
  • Includes four pairs of 2.25" diameter, flow-through bulkhead fittings that let you easily connect components


Type of Container IBCs
Dimensions 62.5" W x 313" L x 8.75" H
Recycled Content 49% Post-Industrial Recycled Polyethylene
Load Capacity UDL 45000 lbs.
Sump Capacity 375 gal.
Containment Type Poly Containment Pallet
Double-Stackable Unit No
Drain None
Fork Truck Access No Fork Truck Access
Grates (10) 52" L x 26" W Grates
Number of Containers 5 IBCs
Use With Flammables No
Sold as 1 each
Weight 642 lbs.
New Pig Patent 5,562,047 and other foreign patents
Composition Polyethylene

5 - 62.5" L x 62.5" W x 8.75" H Pallet

1 - Tool Kit

4 - 2.25" Bulkhead Fittings (2/pack)

5 - 62.5" L x 62.5" W x 8.75" H Pallets (PAK672-BK-WOD)

1 - Tool Kit (PAK117)

4 - 2.25" Bulkhead Fittings (2/pack) (PAK118)

UNSPSC 24101905
Pigalog® Page Number Page 385

Accessories for PAK122


Additional Information

  • Chemical Compatibility for LDPE Products
  • Instructions for Expansion Tank Assembly
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Assembly Required

Contact Us