PIG® Modular Poly IBC Spill Containment Pallet

PAK122 Write a Review

Holds (5) IBCs, 62.5" x 313" x 8.75", 375 gal. Sump Capacity

Modular system saves you money by sharing sump capacity. Store your IBCs in compliance with containment regulations. Read More

PRICING (Based on quantity)

1+
$2,585.00

This product has accessories — take a look

Description

Modular system saves you money by sharing sump capacity. Store your IBCs in compliance with containment regulations.

Flow-through connections let components share sump capacity to help you meet storage regulations; more economical than individual units
Each heavy-duty pallet section supports 9,000 lb. UDL and accommodates almost any size IBC unit
Pallet sections and tanks are 100% polyethylene to resist corrosion and most chemicals, including acids, solvents and oils
Each pallet section features 4-way forklift pockets for easy moving
Non-slip grates lift out for easy sump access
Low profile allows easy loading and access
Increase sump capacity by adding on an individual pallet section (PAK672) or Expansion Tank (PAK116)
Includes specially designed tool kit for connecting components; kit also sold separately as PAK117

Includes four pairs of 2.25" diameter, flow-through bulkhead fittings that let you easily connect components

Specifications

Holds	(5) IBCs
Dimensions	62.5" W x 313" L x 8.75" H
Recycled Content	49% Post-Industrial Recycled Polyethylene
Load Capacity UDL	45000 lbs.
Sump Capacity	375 gal.
Double-Stackable Unit	No
Drain	None
Fork Truck Access	No Fork Truck Access
Grates	(10) 52" L x 26" W Grates
Use With Flammables	No
Sold as	1 each
Weight	642 lbs.
New Pig Patent	5,562,047 and other foreign patents
Composition	Polyethylene
Includes	5 - 62.5" L x 62.5" W x 8.75" H Pallet 1 - Tool Kit 4 - 2.25" Bulkhead Fittings (2/pack) 5 - 62.5" L x 62.5" W x 8.75" H Pallets (PAK672-BK-WOD) 1 - Tool Kit (PAK117) 4 - 2.25" Bulkhead Fittings (2/pack) (PAK118)
UNSPSC	24101905
Pigalog® Page Number	Page 385

Accessories for PAK122

Reviews

Write a Review

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for LDPE Products
Instructions for Expansion Tank Assembly
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

Disclaimers

Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.