-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG® Poly Drip Deck
PIG® Poly Drip Deck
PAK566
(5)
Write a Review
Holds (4) 55 gal. Plastic or Steel Drums, 52" x 52" x 5.75", 44 gal. Sump Capacity
As Low As $290.00
Manage small leaks and drips that mess up your floor and containers with tough New Pig decks.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $303.00 | $290.00 |
Description
Manage small leaks and drips that mess up your floor and containers with tough New Pig decks.
- The strongest drip decks you can buy won't buckle or bow. Guaranteed for life.
- Low-profile 5.75"H design is easy to load or unload; pumps and funnels are easy to access
- Molded-in sump catches leaks, drips and spills to help keep your storage areas clean and safe
- Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals
- Textured grating adds traction and lifts out for easy sump access
- We test all of our Containment Pallet designs at max load for months to ensure they can handle full capacity at your facility
Specifications
| Holds | (4) 55 gal. Plastic or Steel Drums |
| Color | Black/White |
| Dimensions | 52" W x 52" L x 5.75" H |
| Recycled Content | 48% Post-Industrial Recycled Polyethylene |
| Load Capacity UDL | 6000 lbs. |
| Sump Capacity | 44 gal. |
| Double-Stackable Unit | No |
| Drain | None |
| Fork Truck Access | No Fork Truck Access |
| Grates | (2) 48" L x 24" W Grates |
| Use With Flammables | No |
| Sold as | 1 each |
| Weight | 70 lbs. |
| NSN (National Stock Number) | 4235-01-531-9808 |
| # per Pallet | 20 |
| Composition |
Sump - Polyethylene (LDPE) w/ UV Inhibitor Grate - Polyethylene |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 373 |
Accessories for PAK566
Reviews
PIG® Poly Drip Deck
WE JUST PURCHASED 4 OF THESE SKID DECKS FOR SECOND CONTAINMENT REQUIREMENTS AROUND OUR SHOP. OUR COMPANY IS VERY SAFETY ORIENTED AND THESE WORK PERFECTLY FOR ALL OF OUR NEEDS. THE QUALITY OF THE PRODUCT ITSELF IS MORE THAN WE EXPECTED. THEY WILL LAST FOR MANY YEARS TO COME SO VERY MUCH WORTH THE COST.
PIG® Poly Drip Deck
I have bought 3 of these over the past couple years and they have all worked perfectly for us, from storing caustic to non-haz products, they cover all of our needs.
Very good quality product
Ordered this for my dealership to hold four oil filter containers and it is made very well and the drums fit perfectly on it. It shipped super quick and was sent on a pallet for safety. A++
Drip deck
The drip deck is well built and worth the investment and peace of mind for drum leak containment.
great product
great product, great price, and delivered when I needed it. The low height makes it easy to get product on and off yet maintain compliance with spill prevention requirements
Additional Information
- Chemical Compatibility for LDPE Products
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
