-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG® Poly Spill Deck
PIG® Poly Spill Deck
PAK756
(1)
Write a Review
Holds (6) 55 gal. Plastic or Steel Drums, 50.06" x 74.25" x 5.19", 66 gal. Sump Capacity
These decks ship ready to store drums without the labor and expense of connecting multiple sections.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $455.00 | $423.00 |
Description
These decks ship ready to store drums without the labor and expense of connecting multiple sections.
- The strongest standard drip deck you can buy for everyday drum storage
- Wide, one-piece design eliminates the expense and labor of connecting multiple decks
- Strong enough for long-term storage of fully loaded drums
- Molded-in sump catches leaks, drips and spills to help keep your storage areas clean and safe
- Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals
- Low-profile design is under 6" high; easy to load or unload, pumps and funnels are easy to access
- Textured grating adds traction and lifts out for easy sump access
- We test all of our Containment Pallet designs at max load for months to ensure they can handle full capacity at your facility
Specifications
| Holds | (6) 55 gal. Plastic or Steel Drums |
| Dimensions | 50.06" W x 74.25" L x 5.19" H |
| Recycled Content | 52% Post-Industrial Recycled Polyethylene |
| Load Capacity UDL | 6000 lbs. |
| Sump Capacity | 66 gal. |
| Brand | PIG |
| Double-Stackable Unit | No |
| Drain | None |
| Fork Truck Access | No Fork Truck Access |
| Grates | (3) 48" L x 24" W Grates |
| Use With Flammables | No |
| Sold as | 1 each |
| Weight | 130 lbs. |
| # per Pallet | 1 |
| Composition |
Sump - Polyethylene (LDPE) w/ UV Inhibitor Grate - Polyethylene |
| UNSPSC | 24101905 |
| Pigalog® Page Number | Page 373 |
Accessories for PAK756
PAK354
Deck Grate
- For Collapse-A-Tainer Lite; Spill Decks & Pallets
- 24" x 48" x 2.63"
$69.00 - $73.00
Reviews
Many Uses of Spill Platform
We originally purchased this spill platform for environmental compliance. After receipt we found it be suitable as a repair platform for major component disassembly. Prior to receiving this platform, oil leakage from disassembly would leak on the floor causing a wasteful use of spill pads. We purchased a second unit specifically for this use in our shop.
Additional Information
- Chemical Compatibility for LDPE Products
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
