PIG® Poly Spill Pallet with Hinged Hardcover

PAK608 Write a Review

Holds (4) 55 gal. Steel Drums, 57.25" x 54" x 60", 66 gal. Sump Capacity

As Low As $1,067.00

Open the "gull wing" doors and load your drums inside this economical hard cover pallet. Great for outdoor drum storage on a budget. Read More

Please choose an option to see pricing.

$1,067.00 - $1,111.00

This product has accessories — take a look

Description

Open the "gull wing" doors and load your drums inside this economical hard cover pallet. Great for outdoor drum storage on a budget.

Economical "gull wing" hardcovers allow easy access while providing protected storage and liquid containment
Support hinges lock in place to keep cover up and out of the way while you load or unload
Weather-resistant design prevents contaminants from entering storm water
Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals
Available with or without drain plug
Padlockable; attaches at hinge

Specifications

Headroom	6.75"
Holds	(4) 55 gal. Steel Drums
Color	Black/White
Dimensions	57.25" W x 54" D x 60" H
Load Capacity UDL	3000 lbs.
Sump Capacity	66 gal.
Access	2 Hinged Doors
Fork Truck Access	Four-Way Fork Truck Access
Interior Dimensions	48" W x 48" D x 42" H
Use With Flammables	No
Sold as	1 each
Weight	226 lbs.
# per Pallet	1
Composition	Pallet - Low-Density Polyethylene w/ UV Inhibitors Grates - Injection-Molded Polyethylene
UNSPSC	24101905
Pigalog® Page Number	Page 380

Accessories for PAK608

Reviews

Write a Review

Additional Information

Product Data Sheet (PDS)

Chemical Compatibility for LDPE Products
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

Disclaimers

Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.