World’s best stuff for leaks, drips and spills.®
Plus, you get a FREE gift with every order! Start Autoshipping right now —
just change “Ship One Time” to a frequency that suits you. It’s easy!
PRICING (Based on quantity)
|1 -3||4 +|
|Dimensions||5' W x 10' L|
|Drainage Hose Included||No|
|Hanging Straps Included||No|
|Installation Method||Hanging Straps|
|Sold as||1 each|
|# per Pallet||336|
Diverter (Colors) - PVC, Polyester
Leak Diverter (Clear) - PVC w/ Polyester Reinforcement
|Flow Rate||3.33 gal./Minute|
1 - Leak Diverter
1 - Hose Connector Replacement Set (TLS645)
|Pigalog® Page Number||Page 257|
This diverter works great, received it on time, easy to install. We have had a couple of days of really hard rain so far with no problems.
Although we do not have roof leaks from rain, we have issues with condensation that builds up above the ceiling in our cooler and eventually finds its way thru to drip on our finished product. We use the leak diverters to safely have the water run to the drain
Product works great
I used the 4'X10' leak diverter to contain a roof leak (100 gallons a day with a moderate rainfall). The diverter was easy to put in place, the catch area has sidewalls and reinforced stiching in the corners that provides a 2 inch depth. This raised edge design prevents spills from sagging edges. I used the four corners and did not need to make any adjustments and fully contained the leak. There is also an anti plug device included in the kit that keeps the water flowing through the hose even if debris falls into the catch area. Very effective design! The cost is average with similar products, but the design features make this product stand out.
Not suitable for temperatures over 170°F/77°C.
Dimensions are nominal size due to pinched corners and reinforced side walls.