-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG® Single Poly Drum Rack
PIG® Single Poly Drum Rack
PAK573
Write a Review
Holds (1) 55 gal. Steel Tight-Head Drum, 1600 lb. Load Capacity, Dispensing; Sump
As Low As $298.00
Use this Single Poly Rack by itself to provide easy dispensing and sump capacity - add a Single Poly Stacker for even more capacity!
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $314.00 | $298.00 |
Description
Use this Single Poly Rack by itself to provide easy dispensing and sump capacity - add a Single Poly Stacker for even more capacity!
- Rack holds one 30- or 55-gallon drum for secure dispensing and storage
- Stacker (PAK574, sold separately) lets you add a second drum of the same size without sacrificing valuable floor space
- Polyethylene construction resists corrosion and most chemicals
- 66-gallon sump capacity and 1,600 lb. UDL weight capacity
Specifications
| Holds | (1) 55 gal. Steel Tight-Head Drum |
| Material | Plastic |
| Special Feature | Dispensing; Sump |
| Color | White |
| Dimensions | 31" W x 53" L x 32" H |
| Load Capacity UDL | 1600 lbs. |
| Sump Capacity | 66 gal. |
| Sold as | 1 each |
| Weight | 95.45 lbs. |
| # per Pallet | 2 |
| Composition | LDPE |
| UNSPSC | 24101904 |
| Pigalog® Page Number | Page 351 |
Accessories for PAK573
- Holds (1) 55 gal. Steel Tight-Head Drum
- 800 lb. Load Capacity
- Dispensing
$189.00 - $199.00
Reviews
Additional Information
- Chemical Compatibility for LDPE Products
-
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States. -
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways. -
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."
Disclaimers
Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.
