Free Sherpa Blanket with a $199 order. Promo code COMFYBLKT.

PIG® Tank Spill Containment Sump with Drain

PAK108 –

Holds (1) 1,000 gal. Tank 63" x 148" x 33" Sump Capacity 1100 gal.

Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.
Read More >

Risk-Free Guarantee

Please choose an option to see pricing.

$3,253.00 - $3,365.00

View Product Accessories

Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.

Extra-large sump contains leaks, spills and overfills; helps prevent groundwater contamination outdoors and slippery floors indoors
Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals for a long, trouble-free life
Safely stores up to 1,000-gallon oval tanks; no measuring or guesswork required
Choose either 3/4" or 2" drain plug for convenient emptying; also available without drain

Nobody beats the quality, engineering and performance of PIG. You won't find these products anywhere else!

Dimensions	63" W x 148" L x 33" H
Sump Capacity	1100 gal.
Brand	PIG
Holds	(1) 1,000 gal. Tank
Interior Bottom Dimensions	130.5" L x 45.5" W
Use With Flammables	No
Color	Black
Sold as	1 each
Weight	370 lbs.
# per Pallet	5
Composition	Polyethylene (LDPE)
UNSPSC	24111812
Pigalog® Page Number	Page 379

Product Data Sheet (PDS)
Chemical Compatibility for LDPE Products
40 CFR 112.7
SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26
When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175
Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

Disclaimer

Flammables Notice
If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.