PIG™ Tank Spill Containment Sump with Drain

Holds (1) 500 or 550 gal. Tank, 59.75" x 89" x 32.75", 605 gal. Sump Capacity
Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.   Read More 

Please choose an option to see pricing.

$761.00 - $820.00
Pig Exclusive
This product has accessories — take a look 


Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.
  • Extra-large sump contains leaks, spills and overfills; helps prevent groundwater contamination outdoors and slippery floors indoors
  • Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals for a long, trouble-free life
  • Use with tarp (sold separately) to prevent accumulation of rainwater outdoors
  • Safely stores a 500- or 550-gallon oval tank; no measuring or guesswork required
  • Choose either 3/4" or 2" drain plug for convenient emptying; also available without drain


Holds (1) 500 or 550 gal. Tank
Color Black
Dimensions 59.75" W x 89" L x 32.75" H
Sump Capacity 605 gal.
Brand PIG
Interior Bottom Dimensions 75.75" L x 47.75" W
Sold as 1 each
Weight 108 lbs.
# per Pallet 2
Composition Polyethylene (LDPE)
UNSPSC 24111812
Pigalog® Page Number Page 382

Accessories for PAK750


Additional Information

  • Chemical Compatibility for LDPE Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.