Skip to content Skip to navigation menu

PIG® Tank Spill Containment Sump

Holds (1) 275 gal. Tank, 43.63" x 84.5" x 29", 360 gal. Sump Capacity
As Low As $473.00
Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.   Read More 

PRICING (Based on quantity)

$483.00 $473.00
Pig Exclusive
This product has accessories — take a look 

Description

Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.
  • Extra-large sump contains leaks, spills and overfills; helps prevent groundwater contamination outdoors and slippery floors indoors
  • Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals for a long, trouble-free life
  • Use with tarp (sold separately) to prevent accumulation of rainwater outdoors
  • Safely stores a 275-gallon oval tank; no measuring or guesswork required
  • This item is not equipped with a drain plug

Specifications

Holds (1) 275 gal. Tank
Color Black
Dimensions 43.63" W x 84.5" L x 29" H
Sump Capacity 360 gal.
Interior Bottom Dimensions 73" L x 31" W
Product Solution Containment Units
Sold as 1 each
Weight 84 lbs.
# per Pallet 1
Composition LDPE
UNSPSC 24111812
Pigalog® Page Number Page 388

Accessories for PAK580

Reviews

Additional Information

  • Chemical Compatibility for LDPE Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

Disclaimers

Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Contact Us