Skip to content Skip to navigation menu

PIG® Tank Spill Containment Unit with Drain

Plastic, 43.63" x 84.5" x 29", 360 gal. Sump Capacity
As Low As $478.00
Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.   Read More 

PRICING (Based on quantity)

$489.00 $478.00
Pig Exclusive
This product has accessories — take a look 


Park your oval tanks in these extra-large sumps to provide high-volume secondary containment. Great for oil tanks, indoors or out.
  • Extra-large sump contains leaks, spills and overfills; helps prevent groundwater contamination outdoors and slippery floors indoors
  • Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals for a long, trouble-free life
  • Use with tarp (sold separately) to prevent accumulation of rainwater outdoors
  • Safely stores a 275-gallon oval tank; no measuring or guesswork required
  • Convenient drain plug for easy emptying


Style Tank
Type of Container Tanks
Dimensions 43.63" W x 84.5" L x 29" H
Sump Capacity 360 gal.
Containment Type Tray
Interior Bottom Dimensions 73" L x 31" W
Number of Containers 1 Tank
Product Solution Tray
Tray Type Plastic
Sold as 1 each
Weight 84 lbs.
# per Pallet 1
Composition LDPE
UNSPSC 24111812
Pigalog® Page Number Page 388

Accessories for PAK949


Based on 1 reviews

By Barry


Fuel Tank Secondary Containment

Fast and easy ordering with a very quick delivery. Light weight and easy to set up.

Additional Information

  • Chemical Compatibility for LDPE Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Contact Us