Skip to content Skip to navigation menu

PIG® Twin IBC Roll Top Hardcover Spill Pallet

Containment Shed, Use With IBCs, 535 gal. Sump Capacity
As Low As $3,949.00
This roll top hard cover is big and strong enough for your IBCs! Outdoor storage solution helps you comply with EPA regulations.   Read More 

Please choose an option to see pricing.

$3,949.00 - $3,964.00
Pig Exclusive
This product has accessories — take a look 


This roll top hard cover is big and strong enough for your IBCs! Outdoor storage solution helps you comply with EPA regulations.
  • Provides protected storage and liquid containment for IBC units up to 52" L x 52" W x 53" H
  • Weather-resistant design prevents contaminants from entering storm water
  • Low-density polyethylene (LDPE) construction with UV inhibitors resists UV rays, rust, corrosion and most chemicals
  • Durable rolling cover and swing-out doors on both sides provide easy access
  • Roll top can be secured with a padlock (sold separately)
  • Heavy-duty construction has two-way forklift entry for easy movement (unloaded only)
  • Available with or without drain plug
  • Economical "twin" design shares interior wall to reduce complexity and save money over purchasing two single IBC Roll Top Hardcovers


Type of Container IBCs
Dimensions 126.5" W x 62" D x 96" H
Load Capacity UDL 16000 lbs.
Sump Capacity 535 gal.
Access 4 Hinged Doors, 2 Sliding Doors
Containment Type Containment Shed
Fork Truck Access No Fork Truck Access
Interior Dimensions 62" W x 69" H x 60" D
Number of Containers 2 IBCs
Use With Flammables No
Sold as 1 each
Weight 1070 lbs.
# per Pallet 1
Composition Pallet, Cover - LDPE with UV Inhibitor
Grate - Polyethylene
UNSPSC 24101905
Pigalog® Page Number Page 387

Accessories for PAK947


Additional Information

  • Chemical Compatibility for LDPE Products
  • 40 CFR 112.7
    SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
  • 40 CFR 122.26
    When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.
  • 40 CFR 264.175
    Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."


Flammables Notice

If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

Contact Us