-
Call 1-855-493-HOGS
or
or
New Pig – Worlds Best Stuff for Leaks, Drips and Spills
World’s best stuff for leaks, drips and spills.®
PIG™ Vapor-Control Latching Drum Lid
PIG™ Vapor-Control Latching Drum Lid
DRM1033
(1)
Write a Review
For 55 gal. Steel Drums, Vapor Control, Bolt-Ring
This versatile locking lid has two different size openings so you can toss in smaller items while minimizing the amount of harmful vapors that can escape from the larger opening.
Read More
PRICING (Based on quantity)
| 1 -2 | 3 + |
|---|---|
| $541.00 | $511.00 |
Description
This versatile locking lid has two different size openings so you can toss in smaller items while minimizing the amount of harmful vapors that can escape from the larger opening.
- Lid offers controlled, temporary containment of hazardous waste with high vapor emissions
- 5" diameter easy-access port opens to accept waste while discouraging recovery of disposed items and limiting exposure to odor and vapors
- Full-diameter main latching lid allows easy access for emptying or disposal of large items
- Latching handles easily open and close with one hand
- Easy-access lid closes securely to help you meet haz-waste regs
- Nitrile gasket and locking mechanism seal lid to help reduce vapor, odor and VOC emissions
- Hinge stops keep funnel lid upright when open
- Durable, chemical-resistant powder coat helps ensure long service life
- Both latches can be padlocked (lock not included) to prevent unauthorized access
- Hinge pin is made for easy lid removal without loosening band around drum
- Multiple lid color options let you segregate drums for safe, compliant filling
Specifications
| Special Feature | Vapor Control |
| Style | Hinged Lid w/ One-Hand Latch |
| Use With | 55 gal. Steel Drums |
| Dimensions | 23.25" W x 26.75" L x 7.25" H |
| Drum Mounting | Bolt-Ring |
| Drum Size | 55 gal. |
| Drum Type | Steel Drum |
| Sold as | 1 per box |
| Weight | 19 lbs. |
| # per Pallet | 18 |
| Composition |
Lid - Powder-Coated Steel Gasket - Nitrile |
| Padlockable | Padlockable w/ .25" Shackle |
| UNSPSC | 24112112 |
| Pigalog® Page Number | Page 303 |
Accessories for DRM1033
- For 55 gal. Steel Open-Head Drums
- Powder Coated Steel
- 1 each
$175.00 - $183.00
- For 55 gal. Latching Drum Lids
- 1 each
$57.00
- Padlock
- Keyed-Different
- Shackle Dimensions .25" Dia. x 1.5" H
$17.20 - $18.00
LCK106
Keyed-Alike Aluminum Padlock
- Padlock
- Keyed-Alike
- Shackle Dimensions .25" Dia. x 1.5" H
$17.00 - $18.00
Reviews
no more bolts to loose
Use for solvent covered rags. easy open and truly closed when latched. no more fighting rings and bolts just to add/remove from the drum. Once full, lid can be moved to new drum.
Additional Information
- Chemical Compatibility for Nitrile gasket for PIG® Drum lids and funnels
- PIG Latching Drum Lid (Steel) Instructions
-
29 CFR 1910.106(e)(2)(i)
Flammable liquids need to be stored in closed containers that are sealed by a "lid or other device" that does not allow liquids or vapors to escape. -
29 CFR 1910.22(a)
All places of employment "shall be kept clean and dry and in a sanitary condition" and floors shall be kept clean and dry. -
40 CFR 261.4
Helps you comply with 40 CFR 261.4 requiring excluded solvent contaminated wipes to be accumulated and stored in closed containers while they are managed onsite. -
40 CFR 262.15
Satellite Accumulation Areas allow generators of hazardous waste to accumulate as much as 55 gallons of hazardous waste or one quart of acutely hazardous waste in containers at or near the point of generation. The container must be kept closed when not in use, must be under the control of the operator generating the waste and must be properly labeled. -
40 CFR 262.16(b)(2)(iii)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container. -
40 CFR 262.17(a)(1)(iv)
Small and Large Quantity Generators of hazardous waste must keep hazardous waste storage containers closed, except when adding or removing waste from the container. -
40 CFR 264.1086(c)(1)(ii)
Level one containers must have closure devices that, "form a continuous barrier over the container openings." When these closure devices are in place, there can be, "no visible holes, gaps or other open spaces into the interior of the container."
