Three Ways to Get the Most out of Your Absorbent Sock

Absorbent socks offer a cost-effective way of keeping your floors clean and your workplace safe and professional looking. They are best used in diffic

Tips for a Safer Workplace: Avoid Safety Hazards with Proper Management of Used Wipes and Rags
Frequently Asked Questions and Answers From New Pig’s Tech Department
Preventing Costly Accidents & Environmental Damage with the Right Spill Equipment

Three Ways to Get the Most out of Your Absorbent SockAbsorbent socks offer a cost-effective way of keeping your floors clean and your workplace safe and professional looking. They are best used in difficult places where other absorbents don’t fit as they are flexible and mould to almost any surface. Not only do socks contain liquid leaks, drips and spills but they also absorb them, preventing them from spreading and damaging inventory, the environment and employees.

There are many different types of absorbent socks available on the market today. Once you have selected the best sock for your needs it is important that you use them correctly so that you are getting the most out of your absorbent socks. The tips below will help you to make sure that you are using your absorbent socks to their full potential and will ensure that your facility is kept clean and safe.

Make sure the sock is in direct contact with the floor and liquid

Absorbent socks work best when they have direct contact with the floor and the spilled liquid that needs to be absorbed. It is therefore important to make sure that all loose absorbents, rags and debris are cleared from the floor surrounding a spill or around leaking machines before you use your absorbent sock. Any material still on the floor will prevent the sock from moulding properly to the floor and may cause liquids to seep through and spread further. Good surface contact can also be achieved by making sure that the filler is evenly distributed throughout the sock. As absorbent socks are not filled to full capacity it is easy to do this by simply holding the sock at each end and shaking the filler throughout the sock before you place it around the leak or spill.

Use them around areas where other absorbents may not work

Absorbents socks present an ideal solution for absorbing leaks in difficult places such as machines bases, ledges and along drip pans as well as containing and absorbing liquid spills on floors. Using them in hard to reach places will enable you to capture leaks before they have the chance to spread and reach walkways, and will help to make your facility look cleaner and more professional. Other absorbents may not fit or work as well in these tight spaces so it is best to use your absorbent socks in these situations so that they are being used in the best way possible.

Dispose of socks properly when they are fully saturated

To get the most out of your absorbent socks you should always make sure that you use them to their full potential and dispose of them properly. You will know when it is time to replace your absorbent socks when you see puddles of liquid forming around them or passing underneath. When you see this happening you can simply just pick up the socks and replace them with new ones, enabling easier and less messy cleanup. This will prevent the liquid from spreading and potentially causing damage to inventory or the environment and posing a slip hazard to employees.

Find out more:

New Pig provide a comprehensive range of Socks & Booms from our online shop. Or why not give us call on 0800 919 900.

COMMENTS